Description
The Airsal 80cc Cylinder Kit "Xtreme" Derbi Euro 2, for a very good price.
It has a 50mm bore and can be used with the original crankshaft.
The Airsal 80cc "Xtreme" Cylinder Kit is made of Nikasil-plated aluminium, has 6 transfer port, a bridged exhaust port and, newly introduced in 2014: 2 additional boost ports! These boost ports each have 2 outlets, one of them bypassing the stud bolt. This will of course increase your range at high rpms.
The kit includes a single-ring piston (d=50mm) and a high-compression monobloc cylinder head.
To get the most out of the Airsal 80cc Cylinder Kit "Xtreme" Derbi Euro 3 (D50B0), we recommend the following configuration:
- 28mm carburetor (PWK or VHST) such as Stage6 R/T.
- High-end Racing exhaust
- Inner rotor racing ignition
How to Install a cylinder on a scooter, motorcycle or moped
The cylinder or cylinder kit is the heart of the engine on scooters, motorcycles and mopeds. It consists of a cylinder, a piston with piston ring(s), a cylinder head and gaskets needed for installation.
The service life of a cylinder depends on whether it has been fitted correctly.
Tuning Level: Racing
We categorize our products into different performance levels Original, Sport, Racing and High End , so that our customers can choose the right parts for their setup. It is really important to combine parts that belong to the same tuning level, this is especially true for cylinders, crankshafts and exhausts.
Racing products are designed for a more extreme uses and are developed primarily for racing. Whether you stay at 50cc or increase the displacement, the corresponding Racing parts produce much higher performance than the original parts in order to achieve maximum power.
Aluminium cylinders
Aluminium cylinders are more powerful than cast iron cylinders, but require more regular maintenance and must be combined with different components such as a reinforced crankshaft and a larger carburetor.
How to run in an aluminium cylinder?
Aluminium cylinders should be run in for about 200 kilometers , and you should use a fully synthetic engine oil.
Note: To ensure optimum performance and reliability, it is advisable to measure the squish clearance. Just have a look at our tutorial How to adjust squish clearance.