Cylinder Gasket Set Bidalot Racing Factory 2011 Derbi Euro 3 (D50B0)

Bidalot Racing Factory

Bidalot has been known for 50cc tuning and racing components for several decades. The Racing Factory series (RF WR) includes Bidalot's high-end products and is the brand's most powerful series to date.

The series is available for various displacement classes. The Racing Factory products go to the absolute performance limit in all categories.

Racing Factory range

You can equip your bike completely with Bidalot Racing Factory parts and build yourself a high-end racer. Here is a list with Racing Factory parts:

• Cylinder Bidalot RF WR 50cc to 96cc
• Crankshaft Bidalot RF
• Bidalot RF internal rotor ignition
• Clutch Bidalot RF
• Exhaust Bidalot RF
• Gearbox Bidalot RF
• Spare parts Bidalot RF (gaskets, pistons, clutch plates...)

Of course, you need a bit of know-how to install the racing parts correctly and adjust them to yield maximum power.

To get the full potential out of your engine, we recommend buying a high-quality carburetor with the right diameter for the selected displacement.
Also remember to adapt the chassis to the increased engine power, e.g. with improved brakes and suspension.

what does a gasket do?

There are many different types of gaskets or gasket sets in an engine, e.g. cylinder gaskets, intake gaskets, oil seals, crankcase gaskets, exhaust gaskets, carburetor gaskets or engine gasket sets. They all have the same function: to prevent leakage between components.

When and why should you change an engine gasket?

When servicing your two-wheeler or noticing leaking fluids, be sure to follow this one important rule: Always replace an old gasket with a new gasket.
Damaged or worn gaskets can no longer do their job properly, the parts that have to be sealed are no longer adequately sealed, which can lead to serious follow-up damages.

Before you install a new gasket, you must thoroughly clean and degrease the sealing surface.

You can also use silicone sealant as an alternative to paper or metal gaskets in some cases. But beware, O-rings and oil seals cannot be replaced by sealant.