Description
V-belt Dayco polyamide Yamaha Tmax 500cc from 2004
Replacement V-belt for maxi scooter Yamaha T-Max 500cc after 2004.
Technical details Dayco drive belt:
- Dimensions: 892 x 30.8 x 15.5 mm / 28°
- Reinforced quality with polyamide fibers
When to change the V-belt?
On scooters, the engine power is transmitted to the rear wheel via the V-belt or drive belt, which connects the CVT variator to the torque drive. As a rule, it should be replaced every 10,000 to 20,000 km. The belt slips when it is heavily worn. By the way, a new belt also slips and needs a short run-in period.
How to change the drive belt?
Replacing the V-belt is a relatively easy, you don't need advanced technical know-how. The first step is to remove the variator cover to get to the variator. You'll need a piston stopper and a blocking tool to remove the CVT and clutch bell. You can then remove the worn V-belt and replace it with the new one. When reassembling, make sure that the V-belt is properly seated and has the correct tension.
Here's a little tutorial on How to change the CVT and drive belt (English Subs).