Malossi Primary Transmission 23/64 Vespa Cosa / PXE 200cc
Sorry, this Item has been Discontinued
This product is no longer being manufactured, so unfortunately we can no longer offer it.
However, we would like to help you find an alternative. Please take a look at other products within the same category or contact us so we can help you with selecting the right product.
Description
Founded in 1930, Malossi continues to be one of the leading manufacturers of tuning parts for scooters and mopeds. Top quality materials and excellent workmanship are typical of everything made by Malossi.
The Malossi Primary Transmission 23/64 Vespa PX / Cosa 200cc, gearbox with 23/64 teeth primary drive gears. You should change gear ratio whenever you upgrade / tune your engine by installing a tuning cylinder or racing exhaust to exploit the increase in power, especially the power generated at high rpm. Taller gears reduce the overall gear ratio of your transmission and will result in improved acceleration, a higher gear ratio increases top end speed.
The gears have straight teeth to minimize friction and resulting power losses; in addition, straight gears minimize axial load so the stress on bearings and shaft is greatly reduced.
- 23/64 teeth
- straight teeth
- primary gears
Scooter gearbox
The transmission of scooters and some mopeds is located in a case behind the clutch and torque driver and has the function of reducing rpm and ultimately driving the wheel axle.
The transmission of a scooter has a direct influence on top speed. If the engine develops enough power and torque at low rpm, you can choose a longer gear ratio to achieve a higher top speed without any noticeable loss in acceleration.
Please note: if you don't have a press, better choose pre-assembled gears!
| Malossi Primary Transmission 23/64 Vespa Cosa / PXE 200cc | |
|---|---|
| Article no. | M673888 |
| Weight | 0,50 kg |
| Series | HTQ |
| Brand | Malossi |
| Product type | Transmission |
| Type | Primary |