Description
V-belt Kymco
For many scooter models we offer very good, stable and low-priced replacement V-belts, which do not need to hide from the big manufacturers. Here it is a V-belt for Kymco 2-stroke / 4-stroke (Dink, Agility and others) and SYM scooters.
- V-belt in standard quality
- Dimensions: 743x18x8mm
When to change the V-belt?
On scooters, the engine power is transmitted to the rear wheel via the V-belt or drive belt, which connects the CVT variator to the torque drive. As a rule, it should be replaced every 10,000 to 20,000 km. The belt slips when it is heavily worn. By the way, a new belt also slips and needs a short run-in period.
How to change the drive belt?
Replacing the V-belt is a relatively easy, you don't need advanced technical know-how. The first step is to remove the variator cover to get to the variator. You'll need a piston stopper and a blocking tool to remove the CVT and clutch bell. You can then remove the worn V-belt and replace it with the new one. When reassembling, make sure that the V-belt is properly seated and has the correct tension.
Here's a little tutorial on How to change the CVT and drive belt (English Subs).
