Description
Banjo bolt for master cylinder units and brake calipers with M10x1.25 threads.
NOTE: Don’t forget to check the thread size!
Banjo bolts
In our store we mainly carry banjo bolts for motorcycle and scooter brakes.
Banjo bolts perform an important function in brakes: they connect the hose to the brake components. The screws have a hole so that the brake fluid can circulate in the hose between the brake parts of an hydraulic brake system (caliper or master cylinder / brake pump).
CAUTION: Banjo bolts must be installed with TWO special gaskets located on both sides of the hose connection! Once they start leaking, you won't be able to brake properly.
You should also consider the diameter (8, 10 or 12 mm) and the required pitch (1.00 or 1.25).
The tightening torque is usually between 15 and 25 Nm.
| Banjo Bolt, M10x1.25 / steel, hex head with flange (brake cylinder / caliper) | |
|---|---|
| Article no. | MF96.90037 |
| EAN | 8005361310937 |
| Weight | 0,02 kg |
| Brand | MotoForce |
| Product type | Banjo bolts |
| Screw size | M10x1,25 |
