Drive Belt Mitsuboshi Piaggio X10 125cc after 2013
incl. tax, plus shipping
Description
V-belt Mitsuboshi Piaggio X10 125cc from 2013
Mitsuboshi manufactures original equipment quality V-belts for two-wheelers.
Replacement belt for various Piaggio 125cc models such as Beverly, X10 and Aprilia Sportcity Cube.
Technical details Mitsuboshi drive belt:
- Dimensions: 937 x 22.5 x 10.2 mm / 30°
When to change the V-belt?
On scooters, the engine power is transmitted to the rear wheel via the V-belt or drive belt, which connects the CVT variator to the torque drive. As a rule, it should be replaced every 10,000 to 20,000 km. The belt slips when it is heavily worn. By the way, a new belt also slips and needs a short run-in period.
How to change the drive belt?
Replacing the V-belt is a relatively easy, you don't need advanced technical know-how. The first step is to remove the variator cover to get to the variator. You'll need a piston stopper and a blocking tool to remove the CVT and clutch bell. You can then remove the worn V-belt and replace it with the new one. When reassembling, make sure that the V-belt is properly seated and has the correct tension.
Here's a little tutorial on How to change the CVT and drive belt (English Subs).
| Drive Belt Mitsuboshi Piaggio X10 125cc after 2013 | |
|---|---|
| Article no. | CGN489953 |
| Weight | 0,30 kg |
| Brand | Mitsuboshi |
| Product type | V-belt |