- Data Sheet
- Suitable for (21)
We are constantly extending our catalogue and trying to make new, interesting products available to you - MVT Crankshaft "SRace SC" Derbi Euro 3 (D50B0) with 44.8mm stroke.
It is a full-circle crankshaft meaning that primary compression in the crankcase is increased which in turn means more torque. The counterweights are made of HQ tungsten alloy. The connecting rod is polished, this gets rid of stress risers and reduces premature breakage. The balancing is much more precise than on a stock crankshaft so your engine will run smoother, especially at high rpm, and is more reliable.
Suitable up to 18,000rpm. We recommend using it with racing engines (44.8mm stroke).
Main bearings and oil seals are not included, sold separately.
For Derbi Euro 3 (D50B0) / 44.8mm stroke - 12x16x16mm small end bearing (included).
Name MVT Crankshaft SRace SC stroke=44.8mm Derbi Euro 3 (D50B0 cage 12x16x16mm) Item No. MVT-VI21 Brand MVT Product Line Racing, Hyper racing RPM Range 0 - 16000 RPM Stroke Original Conrod Length Standard Piston Pin Original Bearing Ø original
Your product goes with the following manufacturers and their models:
RS4 50cc (after 2011 - D50B0 Euro 3)
RS 50cc (D50B0) - 2006 - 2011
RX 50 (as from 2006 D50B1)
RX Enduro 50cc (D50B0) - after 2006
SX SM 50cc (D50B0) - after 2006
GPR 50cc Nude 2005 2011 (D50B0 Euro 3)
GPR 50cc Racing 2005 - 2011 (D50B0 Euro3)
GPR 50cc after 2012
Senda DRD PRO Racing SM(after 2005)-(D50B0 Euro 3)
Senda DRD PRO SM (after 2005) - (D50B0 Euro 3)
Senda R DRD PRO Enduro (after 2005) -(D50B0 Euro 3)
Senda R DRD Racing Enduro (after 2005)-(D50B0 Euro 3)
Senda R X-Race Trail (after 2005) - (D50B0 Euro 3)
Senda R X-Treme Enduro (after 2005)-(D50B0 Euro 3)
Senda X-Race SM (after 2005) - (D50B0 Euro 3)
Senda X-Treme SM (after 2005) - (D50B0 Euro 3)
RCR Enduro 50 (as from 2011 D50B0)
RCR Enduro 50cc 2006 (D50B0) - (perimeter)
SMT SM 50 (2011-2012 D50B0 ZAPABB00)
SMT SM 50 (after 2013 D50B0 ZAPABB01)
SMT SM 50cc 2006 (D50B0) - (perimeter)