NG Brake Disc front 240mm Yamaha DTR after 2003
Description
Make sure to check size/type of your original disc before ordering.
outer diameter: 240mm
inner diameter: 108mm
mount: 6 holes
Motorcycle and scooter brake disk
The brake disc on the front wheel and / or rear wheel play an essential role in the braking system of motorcycles and scooters.
Brake rotors are firmly attached to the wheel or wheel hub with brake bolts. They work in conjunction with the brake pads, which are pressed onto the brake discs via the brake caliper. This pressure creates the friction that is important for braking, which allows the vehicle to slow down and come to a stop.
When to change the brake rotor?
Brake pads wear out faster than brake discs and need to be replaced regularly. Brake discs, on the other hand, can last between 20,000 and 40,000 kilometers, depending on driving conditions. It is recommended that you monitor brake pad wear and inspect brake rotors for signs of excessive wear or deformation. If you see any sign of damage, the brake disc should be replaced.
No matter if standard, wave or floating - when you install a new brake disc on your scooter or motorcycle, you should also replace the brake pads at the same time. You should securely fasten front or rear brake disc with threadlocker.
| NG Brake Disc front 240mm Yamaha DTR after 2003 | |
|---|---|
| Article no. | CGN450418 |
| EAN | 8435502406692 |
| Weight | 0,82 kg |
| Brand | NG Brake Disc |
| Product type | Brake disc |
| Brake material | Steel |
| Diameter | 240 mm |