Skip to content
Scooter
50cc Bike
Moped
Motocross
NK200.04_01.jpg
NK200.04_02.jpg
NK200.04_01.jpgNK200.04_02.jpg
Naraku
Article no.: NK200.04

Intake spacer Naraku Jet Flow, GY6 139QMB/QMA

14,50 €

incl. tax, plus shipping

Availability:
In stock
Dispatch:
Immediate
Attention!

You did not select a vehicle.
You still want to buy this item?

Attention!

Note: The product does not match the selected vehicle model. Continue anyway? 

You'll get 14 reward points
Share product

Description

CNC-milled aluminium intake spacer from NARAKU. The NARAKU Jet Flow is specifically designed to optimize the intake flow for the 51mm NARAKU cylinder head. The spacer’s conical bore creates an unimpeded flow from the 24mm manifold into the 21mm manifold intake port of the NARAKU 51mm cylinder head (found in 51mm and 52.4mm cylinder kits from NARAKU). The Venturi effect accelerates the feed of fresh gas, which provides a better filling of the combustion chamber resulting in increased torque.

After adjusting the original cylinder head or the intake, the spacer can also be used with the original set-up or tuning stages with kits below 90cc. Using a 24mm carburettor is highly recommended, but not obligatory.

When mounting the spacer, please ensure that the connection between the intake and the cylinder head is kept clean and free of dirt and debris. The spacer may also be mounted reversed 180 degrees. In this case it covers a part of the inlet channel, though.
Questions about the product
 
 
Notes and Safety

What is a reed valve spacer?

The reed valve spacer is an aluminum component that is placed between the crankcase and the reed valve. It is often used on 50cc 2-stroke scooter and motorcycle engines.

what is the function of a reed valve spacer?

Adding a spacer under the reed valve increases the height of the block, thus increasing the volume available in the engine block. In addition, the spacer causes the boost ports of the cylinder to be flowed freely, which can improve gas flow and performance.

It is important that the thickness of the spacer matches your engine setup. As a rule of thumb, the larger the displacement, the thicker the spacer. Since every engine is unique, you'll have to experiment a bit to find the right thickness.

Note: When installing a reed valve spacer, it is critical that the engine is properly sealed, so it is best to use new intake gaskets or engine sealant.

Technical details
Intake spacer Naraku Jet Flow, GY6 139QMB/QMA
Article no.NK200.04
EAN4250362414847
Weight0,04 kg
BrandNaraku
Product typeIntake spacer
Compatible vehicles for this article
AGM
ATU
Adly (Her Chee)
Baja
Baotian
Beeline
Benero
Benzhou
Buffalo
CPI
Dazon
Diamo
Dotera
EUROCKA
Eppella
Ering
Explorer (ATU)
Flex Tech
Fly Scooters
GT Union
Garelli
Generic
Gorilla Motor Works
Hercules
Huatian
IVA
JM Motor
Jack Fox
Jinlun
Jmstar
Jonway
Karcher
Kreidler
Kymco
Lance
Lifan
Longbo
Longjia
MKS
Malaguti
Mash
Massimo
Mawi
Milestorm
Moto Zeta
Motobi
Motofino
Motorro
Motowell
Motoworx
MuZ / MZ
Nova Motors
Pegasus
Peugeot
Pulse
Puma
Q-Link
Qingqi (Jinan Qingqi)
REX (Jinan Qingqi, Shenke)
RIDE
RS Ultima
Rieju
Rivero
Roketa
SYM (Sanyang)
Sachs
Schwinn
Seikel
Sprint
Sukida
SunL
TGB
TNG
TNT Motor
Tank
TaoTao
Tauris
Vastro
WT Motors
Wangye
Wild Eagle
Xinling
Xintian (Kinroad)
ZhongYu
Zjhuatian
Znen
Zongshen
Customer reviews
Be the first to review this product!
Write a review
Shopping cart

JavaScript ist in Ihrem Browser deaktiviert.
Bitte aktivieren Sie JavaScript um unseren Webshop nutzen zu können und laden diese Seite erneut.

Back to top
Categories
Products