Plasti Dip Rubber Coating Spray Blaze, 325ml, pink

Name: Plasti Dip Rubber Coating Spray Blaze, 325ml, pink
Brand: Standard Parts
SKU: PD-019/US
Price: 25.5 EUR
Availability: SoldOut

Sorry, this Item has been Discontinued

This product is no longer being manufactured, so unfortunately we can no longer offer it.

However, we would like to help you find an alternative. Please take a look at other products within the same category or contact us so we can help you with selecting the right product.

Description

Multi-purpose Rubber Coating Spray by Plasti Dip, a US company specializing on coatings and adhesives. Their neon Blaze line will turn any item into an eye-catcher. The rubber coating will not only help you customize your bike but will also protect coated parts against moisture / corrosion, acid and abrasion. It remains flexible and will not crack even under more extreme conditions and temperatures.

The spray coating can be used on almost all types of surface and materials. Definitely one of the quickest ways to change the look of rims, fairing parts etc. For best results and long-term bright colors of the Blaze product line, we recommended that you pair the product with a white Plasti Dip base coat.

And in case you no longer like the colour - just peel the coating off and your bike or coated item will look exactly like it did before!

Note: proven for temperatures -34°C bis +93°C, this means you might run into problems on rims with drum brake.

Colour: Pink.

Questions about the product

Downloads and Media

Safety data sheet

Notes and Safety

Spray Paints

Although our spray paints are mostly universal paints that can be used on all surfaces, there are also special paints for rims, for parts exposed to extreme heat, rust protection paints, etc. In all cases, the surface must be properly prepared before applying the spray paint.

Painting with spray Paint

Preparation

Before the new paint is applied, you must sand the surface! The surface cannot be smooth and shiny, but has to be relatively rough, so that the paint adheres well.
Also make sure that the surface is degreased. Use a strong grease-dissolving product like brake cleaner.
Cover the areas you don't want to paint with masking tape; it's best to mask generously.
To make the paint look as specified and even, you should also apply a coat of primer. Make sure that the primer matches the material: For plastic parts, use a special plastic primer.
Apply the primer in a dry and dust-free place.

Painting

Read the instructions on the spray can carefully. You will usually find useful information, such as the distance from which to spray, the recommended temperature range, etc....
It is best to spray in a dry, dust-free and ventilated place.
Apply several coats to get an intense and even color. Tip: Apply thin coats and be sure to follow the drying times to avoid running!

Finishing

For a perfect finish, you can also apply a layer of clear coat, gloss or matte depending on the look you prefer.
Again, make sure you choose the right type of paint: For example, if you used acrylic paint, you'll need an acrylic clear coat. For components that are exposed to high temperatures, you will need heat-resistant high-temperature paint.

Paint care

To ensure that your paint job stays clean and shiny, you should store your vehicle in the shade in the summer and dry in the winter.
Storing it in a garage will protect the paint from aggressive UV rays and the elements. Alternatively, you can also use a bike cover or mobile garage.

Always clean your scooter, moped or motorcycle with suitable cleaning agents and soft, clean sponges, brushes and cloths. You can also use paint protection to keep the fairing clean and shiny.

If a simple cleaning is no longer enough to bring the surfaces back to a high gloss, you can use paint polish to refresh the colours.

1. Classification of the substance or mixture
Classification according to Directive 67/548/EEC or 1999/45/EC

Hazard designations: F+ - Extremely flammable, Xn - Harmful, Xi - Irritant, N - Hazardous to the environment
Dangerous for the environment
R-phrases:
Extremely flammable.
Harmful by inhalation.
Irritating to skin.
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Classification according to Regulation (EC) No 1272/2008 [CLP]

Hazard categories:
Aerosols: Aerosol 1
Skin corrosion/irritation: Skin irrit. 2
Specific target organ toxicity (single exposure): STOT inm. 3
Hazardous to the aquatic environment: Aqu. chron. 2
Hazard statements:
Extremely flammable aerosol.
Pressurized container: May burst if heated.
Causes skin irritation.
May cause drowsiness and dizziness.
Toxic to aquatic organisms, with long lasting effects.

2. Label elements
Hazard-determining components of labelling
Heptane; branched, cyclic and linear
Butanone; Ethyl methyl ketone

Signal word: Danger
Pictograms: GHS02-GHS07-GHS09

Hazard statements

H222 Extremely flammable aerosol.
H229 Pressurized container: May burst if heated.
H315 Causes skin irritation.
H336 May cause drowsiness and dizziness.
H411 Toxic to aquatic life with long lasting effects.

Precautionary statements
P101 If medical advice is needed, have container or label at hand.
P102 Keep out of the reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P261 Avoid breathing dust/fume/gas/mist/vapor/aerosol.
P264 Wash hands and face thoroughly after use.
P271 Use only outdoors or in well-ventilated areas.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of water.
P321 Special handling (see advice on this label).
P332+P313 If skin irritation occurs: Get medical advice/attention.
P362+P364 Remove contaminated clothing and wash before reuse.
P304+P340 IF INHALED: Remove person to fresh air and ensure unobstructed breathing.
P312 If you feel unwell, call a POISON CENTER/doctor.
P391 Absorb spillage.
P403+P233 Keep in a well-ventilated place. Keep container tightly closed.
P405 Keep locked up.
P410+P412 Protect from sunlight and do not expose to temperatures exceeding 50 °C/122 °F.
P501 Dispose of contents/container to hazardous or special waste collection point in accordance with local regulations.

Special labelling of certain mixtures
EUH018 In use, may form explosive/flammable vapor/air mixture.
For professional users only.