Skip to content
Scooter
50cc Bike
Moped
Motocross
p1400207_p1400207_01.jpg
p1400207_p1400207_02.jpg
p1400207_p1400207_03.jpg
p1400207_p1400207_04.jpg
p1400207_p1400207_05.jpg
p1400207_p1400207_01.jpgp1400207_p1400207_02.jpgp1400207_p1400207_03.jpgp1400207_p1400207_04.jpgp1400207_p1400207_05.jpg
Polini
Article no.: P140.0207

Polini Cylinder Kit "Big Evolution" 70cc Piaggio NRG / Runner

Sorry, this Item has been Discontinued

This product is no longer being manufactured, so unfortunately we can no longer offer it.

However, we would like to help you find an alternative. Please take a look at other products within the same category or contact us so we can help you with selecting the right product.

Description

Polini 70cc Cylinder Kit Evolution Piaggio NRG / Runner, a 70cc "Hyper Racing" kit in Polini's "Big Evo" series.

The kit includes:

  • 70cc Aluminium Cylinder, for 85mm conrod, with 6 transfer ports and bridged exhaust port
  • Single-Ring Piston
  • High-Compression Monobloc Cylinder Head
  • Gasket Kit for mounting and adjusting squish
  • Stud Bolt Set
  • small end bearing, d=13mm (13x17x17.7mm)

The design of the kit was revised, among of the redesigned features:

  • the kit got a fresh look as the cylinder was cast using the same mould as the 94cc cylinder.
  • the exhaust port exit is equipped with a triangular adapter plate held in place by 3 screws (your exhaust flange will be mounted on this plate)
  • the high-compression cylinder head is cast from one piece (monobloc) and precision machined (with internal water passage and centering pins)

Quality of materials and workmanship of this cylinder kit are definitely top-of-the-line.

Note 1: the exhaust flange has a different angle than the original exhaust port face and can only be used with a Polini Big Evo exhaust (same series).

Note 2: the Polini 70cc Cylinder Kit Evolution Piaggio NRG / Runner can only be mounted with a 85mm connecting rod (and a 17mm small end bearing), and you'll have to mill the crankcase to make room for the cylinder base.

Questions about the product
 
 
Notes and Safety

How to Install a cylinder on a scooter, motorcycle or moped

The cylinder or cylinder kit is the heart of the engine on scooters, motorcycles and mopeds. It consists of a cylinder, a piston with piston ring(s), a cylinder head and gaskets needed for installation.

The service life of a cylinder depends on whether it has been fitted correctly.

Tuning Level: High End racing

We categorize our products into different performance levels  Original, Sport, Racing and High End , so that our customers can choose the right parts for their setup. It is really important to combine parts that belong to the same tuning level, this is especially true for cylinders, crankshafts and exhausts.

High End Racing products are exclusively designed for racing and should only be handled by tuning pros with the appropriate technical know-how. High-end racing parts often require modifications or machining of certain elements to accommodate the often larger components (larger crank webs, larger intake, etc.). Whether you stick with 50cc or increase the displacement, high-end racing parts offer much higher performance than the original parts and are the most powerful tuning parts.

Note: To ensure the reliability of the engine, it is important that the parts are compatible and that you do regular maintenance on your two-wheeler.

    Aluminium cylinders

    Aluminium cylinders are more powerful than cast iron cylinders, but require more regular maintenance and must be combined with different components such as a reinforced crankshaft and a larger carburetor.

    How to run in an aluminium cylinder?

    Aluminium cylinders should be run in for about 200 kilometers , and you should use a fully synthetic engine oil.

    Note: To ensure optimum performance and reliability, it is advisable to measure the squish clearance. Just have a look at our tutorial How to adjust squish clearance.

    Technical details
    Polini Cylinder Kit "Big Evolution" 70cc Piaggio NRG / Runner
    Article no.P140.0207
    EAN4051272270581
    Weight1,17 kg
    SeriesEvolution
    BrandPolini
    Product typeCylinder kit
    Tuning levelHigh-end
    Displacement70cc
    HomologationNo
    Piston pin12 mm
    Cylinder materialAluminium
    Bore47,6 mm
    StrokeOriginal
    Conrod length85 mm

    Spare Parts

    Compatible vehicles for this article
    Customer reviews
    5
    1 Ratings
    1
     
    0
     
    0
     
    0
     
    0
     
    Ya
    Yael
    polini evo
    rivalise le 70 mhr team
    Write a review
    Shopping cart

    JavaScript ist in Ihrem Browser deaktiviert.
    Bitte aktivieren Sie JavaScript um unseren Webshop nutzen zu können und laden diese Seite erneut.

    Back to top
    Categories
    Products