Skip to content
Scooter
50cc Bike
Moped
Motocross
cylindre-culasse-stage6-racing-70cc-mkii-axe-de-12mm-cpi-keeway-s6-7419502_001.jpg
cylindre-culasse-stage6-racing-70cc-mkii-axe-de-12mm-cpi-keeway-s6-7419502_003.jpg
cylindre-culasse-stage6-racing-70cc-mkii-axe-de-12mm-cpi-keeway-s6-7419502_004.jpg
cylindre-culasse-stage6-racing-70cc-mkii-axe-de-12mm-cpi-keeway-s6-7419502_002.jpg
cylindre-culasse-stage6-racing-70cc-mkii-axe-de-12mm-cpi-keeway-s6-7419502_001.jpgcylindre-culasse-stage6-racing-70cc-mkii-axe-de-12mm-cpi-keeway-s6-7419502_003.jpgcylindre-culasse-stage6-racing-70cc-mkii-axe-de-12mm-cpi-keeway-s6-7419502_004.jpgcylindre-culasse-stage6-racing-70cc-mkii-axe-de-12mm-cpi-keeway-s6-7419502_002.jpg
Stage6
Article no.: S6-7419502

Cylinder Stage6 70cc Racing MK2 12mm piston pin China 2-stroke AC / CPI / Keeway

RRP
265,00 €
-10% Discount
239,00 €

incl. tax, plus shipping

Availability:
Currently not in stock
Dispatch:
This item is currently not available. The exact delivery date is currently unknown.
Item currently not available! Please use back-in-stock alert.
Attention!

You did not select a vehicle.
You still want to buy this item?

Attention!

Note: The product does not match the selected vehicle model. Continue anyway? 

Share product

Description

Stage6 Cylinder Kit 70cc Racing MK2 12mm piston pin China 2-stroke AC / CPI / Keeway. The successor of the successful Stage6 70cc racing cylinder is called Stage6 Racing MKII 70cc and was completely redesigned for even better out of the box performance.

The cylinder with high-strength hard chrome bore plating was completely redesigned. A new transfer port design (6 instead of 5 ports) improves cylinder filling. The piston is no longer flat but domed, with a 0.8 mm thick piston ring to optimise performance and improve heat dissipation. Thermal properties were improved in all areas. Generous flushing of the bridged exhaust port; a pentagonal design and internal cooling ribs; one-piece head with cast scavenging canals – to name but a few of the improvements. Port timings are 190°-130°.

The cylinder yields 2 to 3 hp more power than the MK1, between 17-19 hp, without any additional modifications and in combination with the corresponding components. There is enough material for further modifications to get the cylinder above 20 hp. Definitely one of the most powerful 70cc kits on the market!

We recommend using a reinforced crankshaft, a min. 21mm carburetor and a racing exhaust to exploit the full power of this tuning cylinder..

The kit includes.

  • aluminium cylinder, 47.6mm bore
  • 1-ring piston with 12mm piston pin
  • one-piece cylinder head
  • gasket set

We recommend to clean the engine before assembly, check the condition of all components and use a new spark plug and new small end bearing. Do not forget to change your carburetor settings if necessary.

Squish clearance should be between 0.75 and 0.85. The cylinder should be run in for approx. 300 km with a 1:33 mixture to improve robustness and life expectancy.

Attention:

- Original exhausts cannot be mounted with this cylinder.
- The temperature sensor (including thread) may not be longer than 18mm, otherwise it may knock against the cylinder head.

WITHOUT HOMOLOGATION (in some countries)

Questions about the product
 
 
Downloads and Media
Notes and Safety

How to Install a cylinder on a scooter, motorcycle or moped

The cylinder or cylinder kit is the heart of the engine on scooters, motorcycles and mopeds. It consists of a cylinder, a piston with piston ring(s), a cylinder head and gaskets needed for installation.

The service life of a cylinder depends on whether it has been fitted correctly.

Tuning Level: Racing

We categorize our products into different performance levels  Original, Sport, Racing and High End , so that our customers can choose the right parts for their setup. It is really important to combine parts that belong to the same tuning level, this is especially true for cylinders, crankshafts and exhausts.

Racing products are designed for a more extreme uses and are developed primarily for racing. Whether you stay at 50cc or increase the displacement, the corresponding Racing parts produce much higher performance than the original parts in order to achieve maximum power.

Aluminium cylinders

Aluminium cylinders are more powerful than cast iron cylinders, but require more regular maintenance and must be combined with different components such as a reinforced crankshaft and a larger carburetor.

How to run in an aluminium cylinder?

Aluminium cylinders should be run in for about 200 kilometers , and you should use a fully synthetic engine oil.

Note: To ensure optimum performance and reliability, it is advisable to measure the squish clearance. Just have a look at our tutorial How to adjust squish clearance.

Technical details
Cylinder Stage6 70cc Racing MK2 12mm piston pin China 2-stroke AC / CPI / Keeway
Article no.S6-7419502
EAN4051272303951
Weight1,20 kg
SeriesRacing
BrandStage6
Product typeCylinder kit
Tuning levelRacing
Displacement70cc
HomologationNo
Piston pin12 mm
Cylinder materialAluminium
Bore47,6 mm
StrokeOriginal
Conrod lengthStandard

Spare Parts

Compatible vehicles for this article
AGM
ATU
Adly (Her Chee)
Baotian
Benelli
Benero
Benzhou
Buffalo
CPI
Diamo
E-Ton
Eppella
Explorer (ATU)
Forstinger
GT Union
Garelli
Generic
Hercules
Itteco
JM Motor
Jack Fox
Jmstar
Jonway
Kallio
Keeway
Kreidler
Lifan
Longjia
Malaguti
Mash
Mawi
Meteorit (ATU)
Motobi
Motofino
Motomojo
Motorro
Motowell
Motoworx
MuZ / MZ
Nova Motors
Powersports Factory
Pulse
Qianjiang
REX (Jinan Qingqi, Shenke)
RIDE
RS Ultima
Revonec
Rivero
Sachs
Sacom
Saro
Seiran
Sprint
TNG
TNT Motor
Tank
Tauris
Vento
Yamati
Znen
Customer reviews
Be the first to review this product!
Write a review
Shopping cart

JavaScript ist in Ihrem Browser deaktiviert.
Bitte aktivieren Sie JavaScript um unseren Webshop nutzen zu können und laden diese Seite erneut.

Back to top
Categories
Products