Description
Stage6 Cylinder Spacer 5mm w/ stud bolts f. 85mm conrod M6x114mm Piaggio LC (NRG / Runner), for running crankshafts with 85mm connecting rod.
If you want to install a crankshaft with a 85mm connecting rod instead of a regular 80mm crankshaft, you'll have to raise the cylinder to achieve proper deck height for piston travel. This spacer kit was designed for the 85mm Stage6 R/T crankshaft. With some minor adjusting you can now run most tuning cylinders with long-stroke crankshafts with 85mm connecting rod.
Including 5mm aluminium spacer and 4x stud bolts M6x114mm.
Cylinder spacer
Cylinder spacers should only be used by experienced tuners who have enough know-how to understand the complex workings of an engine and implement the corresponding measures.
What is the benefit of a cylinder spacer?
A cylinder spacer may be necessary if you are using a long-stroke crankshaft, as the piston rises higher in the cylinder to increase displacement.
With a 2-stroke engine, however, you cannot simply raise the cylinder. Raising the cylinder will also increase port timingd, which will completely change engine behavior; it can also result in a significant loss of power at low engine speeds.
If you want to use a spacer, make sure that the crankshaft, connecting rod and cylinder are designed for it or are compatible.
Note: Cylinder spacers vary from engine to engine. Their thickness must be matched to the crankshaft and cylinder. Please also remember to order cylinder studs in the correct length.
Cylinder Spacer Stage6 R/T 5mm w/ stud bolts M6x114mm f. 85mm conrod Piaggio LC (NRG / Runner) | |
---|---|
Article no. | S6-79140ET01 |
EAN | 4051272155741 |
Weight | 0,17 kg |
Series | R/T |
Brand | Stage6 |
Product type | Cylinder spacer |
Homologation | ECE Homologation |
Stroke | Original |
Conrod length | Standard |