Piston Circlip Stage6 14mm Double-G
Description
Double G-Clip
High-quality piston circlips by Stage6. They are double G-shaped which makes putting them into the grooves a lot easier.
When installing the circlips, make sure that the piston groove is clean. Put the circlip in the bore with the gap at 6 or 12 o'clock. Please make sure it is seated correctly by turning it in the groove. It is recommended to install the piston with the openings against the running direction of the piston and to fix it with a small drop of threadlocker.
If the retaining clip does not fit, take a look at our huge assortment of piston circlips, you will surely to find the right circlip.
- 1x circlip
- 14mm
Function of circlips
Circlips or retaining clips are small, C-shaped metal parts that hold components on an axle or shaft.
The clips are usually placed in a groove or notch in the axle or shaft to prevent the part from moving or popping out. Piston circlips secure the piston pin to the piston.
We recommend using circlip pliers or a piston clip installation tool to install the circlip.
