Skip to content
Scooter
50cc Bike
Moped
Motocross
s675et0310_01_3.jpg
s675et0310_02_3.jpg
s675et0310_01_3.jpgs675et0310_02_3.jpg
Stage6 R/T
Article no.: S6-75ET03/11

Stage6 R/T Cylinder Head Combustion Chamber Big Bore 95cc d=52mm / h=1.1mm

RRP
40,00 €
-5% Discount
38,00 €

incl. tax, plus shipping

Availability:
In stock
Dispatch:
Ready for immediate dispatch
Attention!

You did not select a vehicle.
You still want to buy this item?

Attention!

Note: The product does not match the selected vehicle model. Continue anyway? 

You'll get 38 reward points
Share product

Description

Stage6 R/T Cylinder Head Combustion Chamber Big Bore 95cc d=52mm / h=1.1mm
Questions about the product
 
 
Notes and Safety

Cylinder head

The cylinder head of an internal combustion engine can have different shapes and contain different elements, depending on the type of engine. While in a two-stroke engine the cylinder head contains only the spark plug, in a four-stroke engine it is much more complex, as it also contains the valves, the camshaft and many other parts that are important for the operation of a 4-stroke engine.

However, these two points apply to any cylinder head:

  • it must be tight
  • it controls compression

Different types of cylinder heads

Each cylinder head is specifically designed for a specific cylinder. You must therefore always make sure that the cylinder head fits the cylinder.

Cooling :

The cylinder head is also partially responsible for cooling the engine. In air-cooled engines it has fins on the outside and in liquid-cooled engines there is chamber for the circulating coolant.

One-piece or two-piece 2-stroke cylinder head

One-piece cylinder heads are the most common, but modular two-piece cylinder heads are also available for 2-stroke engines. The principle is quite simple: the water jacket allows water circulation, while the combustion chamber insert closes off the combustion chamber. The cylinder head can be replaced and modified to achieve different compression ratios and thus different engine behavior.

4-stroke cylinder head

Tuning cylinder heads can also be found for four-stroke engines. Although components optimized for motocross are seldom found on the market (usually they are original components that have been reconditioned to increase performance), there are also racing cylinder heads for scooters and motorcycles. These often have optimized intake and exhaust ports and sometimes even seats for larger valves.

Tuning Level: High End racing

We categorize our products into different performance levels  Original, Sport, Racing and High End , so that our customers can choose the right parts for their setup. It is really important to combine parts that belong to the same tuning level, this is especially true for cylinders, crankshafts and exhausts.

High End Racing products are exclusively designed for racing and should only be handled by tuning pros with the appropriate technical know-how. High-end racing parts often require modifications or machining of certain elements to accommodate the often larger components (larger crank webs, larger intake, etc.). Whether you stick with 50cc or increase the displacement, high-end racing parts offer much higher performance than the original parts and are the most powerful tuning parts.

Note: To ensure the reliability of the engine, it is important that the parts are compatible and that you do regular maintenance on your two-wheeler.

    Aluminium cylinders

    Aluminium cylinders are more powerful than cast iron cylinders, but require more regular maintenance and must be combined with different components such as a reinforced crankshaft and a larger carburetor.

    How to run in an aluminium cylinder?

    Aluminium cylinders should be run in for about 200 kilometers , and you should use a fully synthetic engine oil.

    Note: To ensure optimum performance and reliability, it is advisable to measure the squish clearance. Just have a look at our tutorial How to adjust squish clearance.

    Technical details
    Stage6 R/T Cylinder Head Combustion Chamber Big Bore 95cc d=52mm / h=1.1mm
    Article no.S6-75ET03/11
    Weight0,12 kg
    SeriesR/T
    BrandStage6 R/T
    Product typeCylinder head
    Tuning levelHigh-end
    Displacement95cc
    HomologationECE Homologation
    Piston pin14 mm
    Cylinder materialAluminium
    Bore52 mm
    StrokeOriginal
    Conrod lengthStandard
    Compatible vehicles for this article
    Aprilia
    Benelli
    Beta
    Derbi
    Gilera
    Italjet
    KTM
    MBK
    Malaguti
    Piaggio
    Yamaha
    Customer reviews
    Be the first to review this product!
    Write a review
    Shopping cart

    JavaScript ist in Ihrem Browser deaktiviert.
    Bitte aktivieren Sie JavaScript um unseren Webshop nutzen zu können und laden diese Seite erneut.

    Back to top
    Categories
    Products