Stage6 R/T Drive Belt 748x19.2x10.5mm 30°
Sorry, this Item has been Discontinued
This product is no longer being manufactured, so unfortunately we can no longer offer it.
However, we would like to help you find an alternative. Please take a look at other products within the same category or contact us so we can help you with selecting the right product.
Description
As always with Stage6, you can buy all spare parts separately in our shop.
Stage6 R/T drive belt . High quality racing belt, Polyamid-reinforced for longer belt life. Excellent grip and optimum transmission of engine power to wheel.
Dimensions:
- Length: 748mm
- Height: 10,5mm
- Width: 19,2mm
- Angle: 30°
When to change the V-belt?
On scooters, the engine power is transmitted to the rear wheel via the V-belt or drive belt, which connects the CVT variator to the torque drive. As a rule, it should be replaced every 10,000 to 20,000 km. The belt slips when it is heavily worn. By the way, a new belt also slips and needs a short run-in period.
How to change the drive belt?
Replacing the V-belt is a relatively easy, you don't need advanced technical know-how. The first step is to remove the variator cover to get to the variator. You'll need a piston stopper and a blocking tool to remove the CVT and clutch bell. You can then remove the worn V-belt and replace it with the new one. When reassembling, make sure that the V-belt is properly seated and has the correct tension.
Here's a little tutorial on How to change the CVT and drive belt (English Subs).
| Stage6 R/T Drive Belt 748x19.2x10.5mm 30° | |
|---|---|
| Article no. | S6-5914026 |
| EAN | 4051272255243 |
| Weight | 0,18 kg |
| Series | R/T |
| Brand | Stage6 R/T |
| Product type | V-belt |
| Range | Oversize |
