Riser STR8 XL + 60mm
Description
If you want to jack up your scooter by more than the standard 4 - 5cm, you'll need an "XL" riser. This riser by STR8 will raise your scooter by 60 - 65mm.
Easy install within a couple of minutes. We recommend using a side stand as your original main stand will not be tall enough.
Shock absorber Jack Up Kits
On 50cc scooters and motorcycle, the shock is often raised for aesthetic reasons. However, extending shock length does not only affect seat height and looks of your vehicle.
Advantages of height extensions
Raising the rear of a two-wheeler without changing the front suspension changes the vehicle geometry and thus also performance and handling.
If the rear end is higher than the front wheel, the result is a more closed caster angle. As a result, maneuverability in curves becomes better, but stability at high speeds is reduced.
For motorcycles and motocross bikes, there are lowering kits for both the rear and the front wheel. At the rear, the linkage is replaced, and at the front, spring seats and spacers in the fork must be replaced.
On many models, of course, you can also replace the entire shock absorber to change the length and spring travel.
How to install a shock riser
Shock Riser STR8 XL + 60mm Minarelli / CPI / Honda / Hyosung / Kymco / Sym / Peugeot matte aluminium | |
---|---|
Article no. | STR-205.51/AL |
EAN | 8005361145560 |
Weight | 0,17 kg |
Brand | Standard Parts, STR8 |
Product type | Riser kit |
Colour | Silver, Grey |
Colour version | Aluminium grey / matte |
Shock Riser STR8 XL + 60mm Minarelli / CPI / Honda / Hyosung / Kymco / Sym / Peugeot matte blue | |
---|---|
Article no. | STR-205.51/BL |
EAN | 8005361145577 |
Weight | 0,17 kg |
Brand | STR8 |
Product type | Riser kit |
Position | Rear |
Colour | Blue |
Colour version | Blue anodised / matte |
Shock Riser STR8 XL + 60mm Minarelli / CPI / Honda / Hyosung / Kymco / Sym / Peugeot matte black | |
---|---|
Article no. | STR-205.51/BM |
EAN | 8005361277858 |
Weight | 0,17 kg |
Brand | STR8 |
Product type | Riser kit |
Position | Rear |
Colour | Black |
Colour version | Black / matte |
Shock Riser STR8 XL + 60mm Minarelli / CPI / Honda / Hyosung / Kymco / Sym / Peugeot carbon look | |
---|---|
Article no. | STR-205.51/CA |
EAN | 8005361145584 |
Weight | 0,17 kg |
Brand | STR8 |
Product type | Riser kit |
Position | Rear |
Colour | Carbon |
Colour version | Carbon look |