Chain Kit 13x52 MBK Xlimit / Yamaha DT
Sorry, this Item has been Discontinued
This product is no longer being manufactured, so unfortunately we can no longer offer it.
However, we would like to help you find an alternative. Please take a look at other products within the same category or contact us so we can help you with selecting the right product.
Description
If your chain is starting to stretch out and show signs of easy side to side play, power transmission to the rear wheel will deteriorate and, as a result, performance will suffer. The condition of your sprockets is important as well - you can easily check it as the teeth are either broken, bent, worn down or cupped out at the base.
13x52, size 420.
Note: for MBK Xlimit / Yamaha DTR Enduro 1997 - 2002.
Complete chain Kit
The chain set includes the main components of the chain drive, which are used to transmit the engine power to the rear wheel. Chain kits consist of the following parts: Front sprocket, rear sprocket and chain. You can buy these parts separately or as a complete chain set.
How can I tell that my chain set needs to be replaced?
There are several signs that may indicate that a chain kit needs to be replaced:
- Metallic rattling
- Worn sprocket teeth
- Loose chain that can no longer be properly adjusted
- Difficulty shifting gears or accelerating
- Signs of rust on the chain or sprockets
It is recommended to regularly check and maintain the condition of the chain kit and replace it if there are visible signs of wear.
gear ratio
The transmission ratio of the chain drive is the ratio between the front and rear sprocket. It is calculated as follows: Number of teeth of rear sprocket / Number of teeth of front sprocket. A low ratio increases speed, a high ratio increases acceleration.
Example: 15-tooth front sprocket and 53-tooth rear sprocket: 53/15 = 3.53 gear ratio
