Skip to content
Scooter
50cc Bike
Moped
Motocross
Piston Malossi MHR Team 70cc d=47.6mm / piston pin=12mm (C) Yamaha Aerox / Piaggio NRG
Malossi
Article no.: M348654.C0

Piston Malossi MHR Team 70cc d=47.6mm / piston pin=12mm (C) Yamaha Aerox / Piaggio NRG

72,00 €

incl. tax, plus shipping

Availability:
On demand
Dispatch:
Estimated shipping on 25.04.2024
Attention!

You did not select a vehicle.
You still want to buy this item?

Attention!

Note: The product does not match the selected vehicle model. Continue anyway? 

You'll get 72 reward points
Share product

Description

Piston Malossi MHR Team 70cc 47.6mm 12mm bolt (size C) Piaggio NRG / Yamaha Aerox.

Malossi, manufacturer of high quality tuning parts for scooters, mopeds & Co, is an integral part of the 50cc scooter scene and racing. Constant innovations and consistent first-class quality have made Malossi a must-have for tuning fans.

The piston with piston ring(s), piston pin and locking clips is the moving heart of the cylinder. Due to the constant up and down movement, the piston is subject to wear. At some point, the tolerances are no longer correct, the piston ring no longer seals perfectly and the performance decreases, i.e. the piston must be replaced.

Technical details:

  • Tuning level: High-end
  • Material: Aluminum
  • Displacement: 70cc
  • Bore: 47,6 mm
  • Stroke: Original
  • Piston pin: 12 mm
  • Connecting rod: Original
  • Homologation: ECE homologation
Questions about the product
 
 
Notes and Safety

When to replace the piston?

To find out when the piston on your motorcycle, scooter or moped needs to be replaced, it's best to check your bike's manual. You can also keep an eye out for certain symptoms such as loss of compression, loss of power or oil consumption (only for a four-stroke piston).

Extending Piston life

To extend the life of the piston and reduce cylinder wear, it is recommended that you replace the piston rings on an alternating basis. This method maximizes piston life and improves engine performance.

It is important that you replace cylinder gaskets and piston circlips each time you disassemble the cylinder and piston. Failure to do so can result in oil leaks and engine damage.

Tuning Level: High End racing

We categorize our products into different performance levels  Original, Sport, Racing and High End , so that our customers can choose the right parts for their setup. It is really important to combine parts that belong to the same tuning level, this is especially true for cylinders, crankshafts and exhausts.

High End Racing products are exclusively designed for racing and should only be handled by tuning pros with the appropriate technical know-how. High-end racing parts often require modifications or machining of certain elements to accommodate the often larger components (larger crank webs, larger intake, etc.). Whether you stick with 50cc or increase the displacement, high-end racing parts offer much higher performance than the original parts and are the most powerful tuning parts.

Note: To ensure the reliability of the engine, it is important that the parts are compatible and that you do regular maintenance on your two-wheeler.

    Aluminium cylinders

    Aluminium cylinders are more powerful than cast iron cylinders, but require more regular maintenance and must be combined with different components such as a reinforced crankshaft and a larger carburetor.

    How to run in an aluminium cylinder?

    Aluminium cylinders should be run in for about 200 kilometers , and you should use a fully synthetic engine oil.

    Note: To ensure optimum performance and reliability, it is advisable to measure the squish clearance. Just have a look at our tutorial How to adjust squish clearance.

    Technical details
    Piston Malossi MHR Team 70cc d=47.6mm / piston pin=12mm (C) Yamaha Aerox / Piaggio NRG
    Article no.M348654.C0
    Weight0,20 kg
    SeriesMHR TEAM
    BrandMalossi
    Product typePiston
    Tuning levelHigh-end
    Displacement70cc
    HomologationECE Homologation
    Piston pin12 mm
    Cylinder materialAluminium
    Bore47,6 mm
    StrokeOriginal
    Conrod lengthStandard
    Compatible vehicles for this article
    Aprilia
    Benelli
    Beta
    CPI
    Derbi
    Gilera
    Italjet
    KTM
    MBK
    Malaguti
    Piaggio
    Yamaha
    Customer reviews
    Be the first to review this product!
    Write a review
    Shopping cart

    JavaScript ist in Ihrem Browser deaktiviert.
    Bitte aktivieren Sie JavaScript um unseren Webshop nutzen zu können und laden diese Seite erneut.

    Back to top
    Categories
    Products