Skip to content
Scooter
50cc Bike
Moped
Motocross
Drive Belt Evolution Aramid Piaggio NRG / Typhoon after 1998
Polini
Article no.: U248.029

Drive Belt Evolution Aramid Piaggio NRG / Typhoon after 1998

39,00 €

incl. tax, plus shipping

Availability:
In stock
Dispatch:
Ready for immediate dispatch
Attention!

You did not select a vehicle.
You still want to buy this item?

Attention!

Note: The product does not match the selected vehicle model. Continue anyway? 

You'll get 39 reward points
Share product

Description

Drive Belt Evolution Aramid Belt from Polini

High quality drive belt from Polini. The V-belts are reinforced with aramid fibers to make them extremely tear-resistant and much more durable than standard V-belts. The Polini Aramid drive belts withstand much greater loads and speeds without any problems. Fatigue and wear are reduced, reinforced belts are extremely stable even at high temperatures. Due to the belt's increased elasticity, the optimal operation of the transmission is guaranteed at all times.

The premium V-belts from Polini are the perfect choice for racing, but can also be used in everyday life or in original setups.

Note: Drive belts should always fit properly. Belts that are too narrow and therefore sit too low reduce top speed, belts that are too wide and sit too high lead to power gaps when starting and belts that are too long have too little tension, which has a negative effect on power transmission. 

We recommend to replace the V-belt regularly to ensure optimal transmission of power. Maintenance intervals vary depending on the model, general guideline is 6,000 to 8,000 km for 50cc scooters and 15,000 km (and more) for maxi scooters.

Attention: only for Piaggio / Gilera (long, after 1998, 134mm torque drive) and Aprilia 100cc 4-stroke.

Measurements: 805x19x8 mm / 28°

Questions about the product
 
 
Notes and Safety

When to change the V-belt?

On scooters, the engine power is transmitted to the rear wheel via the V-belt or drive belt, which connects the CVT variator to the torque drive. As a rule, it should be replaced every 10,000 to 20,000 km. The belt slips when it is heavily worn. By the way, a new belt also slips and needs a short run-in period.

How to change the drive belt?

Replacing the V-belt is a relatively easy, you don't need advanced technical know-how. The first step is to remove the variator cover to get to the variator. You'll need to use a piston stopper and a blocking tool to remove the CVT and clutch bell. You can then remove the worn V-belt and replace it with the new one. When reassembling, make sure that the V-belt is properly seated and has the correct tension.

Technical details
Drive Belt Evolution Aramid Piaggio NRG / Typhoon after 1998
Article no.U248.029
EAN8054705081064
Weight0,12 kg
SeriesEvolution
BrandPolini
Product typeV-belt
RangeStandard
Compatible vehicles for this article
Aprilia
Derbi
Gilera
Italjet
Piaggio
Vespa
Customer reviews
Be the first to review this product!
Write a review
Shopping cart

JavaScript ist in Ihrem Browser deaktiviert.
Bitte aktivieren Sie JavaScript um unseren Webshop nutzen zu können und laden diese Seite erneut.

Back to top
Categories
Products