Description
High-quality Stage6 Brake Hose front 200cm with 90° and 45° angles, universal.
This is a braided stainless steel brake line meaning expansion is eliminated and braking performance is considerably improved, no matter in what kind of conditions you're riding. Brake fade is a thing of the past, and brake pressure remains constant with these brake hoses. Recommended for racing use! A PTFE sleeve protects the hose from water contamination and the fairing against scratches and damages.
It is universal, meaning that you can use it for the majority of scooters and mopeds on the market. Just check for proper length and angles of banjo fittings.
- Length: 200cm (rear)
- banjo fittings: 1x 90° and 1x 45°
Brake hoses
Brake hoses or brake lines are relatively reliable, but it can happen that they expand too much when the temperature of the brake fluid rises too much, or that they rust when the brake fluid becomes too old.
Brake lines can be replaced with original brake hoses, or with high quality steel braided brake lines that withstand high temperatures, do not expand and do not become porous. This keeps the pressure point and braking power constant.
How to replace Brake lines
Whether on a scooter or a motorcycle, the principle is always the same. Generally, except on vehicles with brake force distributors, the hose connects the brake pump to the brake caliper.
To remove the hose, you need to remove the banjo bolts at both ends. Be careful not to lose the copper washers! Check the condition of the copper washers and replace them if necessary.
The assembly is done in the same way. Note the position of the washers - one between the banjo fitting and the hose, the other between the hose and the caliper or brake pump.
After having tightened everything (usually 20 to 30 N.m and no more), you need to add brake fluid and bleed the brake system using the bleed screw on the caliper.
You can either bleed manually or with a special brake bleeder.
| Brake Hose rear Stage6 200cm, 90 + 45 | |
|---|---|
| Article no. | S6-1416602 |
| EAN | 8000000777645 |
| Weight | 0,11 kg |
| Brand | Stage6 |
| Product type | Brake line |
Spare Parts
- Stage6 R/T
Banjo Bolt Stage6 for R/T 4-piston caliper, w. bleed nipple10,50 €Currently not in stockRRP11,00 €-5% Discount - MotoForce
Washer (seal) for banjo bolt, d=10x14x2mm / copper2,80 €Currently not in stock - MotoForce
Banjo Bolt, M10x1.25 / steel, hex head with flange (brake cylinder / caliper)4,90 €In stock