Skip to content
Scooter
50cc Bike
Moped
Motocross
pochette-de-joints-stage6-70cc-sport-pro-racing-mkii-minarelli-horizontal-lc-s6-74166et09_001.jpg
Stage6
Article no.: S6-74166ET09

Cylinder Gasket Set Stage6 MK2 Minarelli LC

RRP
27,00 €
-4% Discount
26,00 €

incl. tax, plus shipping

Availability:
In stock
Dispatch:
Ready for immediate dispatch
Attention!

You did not select a vehicle.
You still want to buy this item?

Attention!

Note: The product does not match the selected vehicle model. Continue anyway? 

You'll get 26 reward points
Share product

Description

Stage6 Cylinder Gasket Set MK2 Aluminium 50cc / Racing 70cc / Sport Pro 70cc Minarelli horizontal LC (Yamaha Aerox) to replace old or leaking gaskets.

Gaskets should be replaced if worn or leaking, or whenever removed during servicing. After each disassembly of your cylinder, either for periodical maintenance, simple check ups or after  installing / removing a tuning component it should be a matter of course to exchange the cylinder gaskets.

Perfectly sealing gaskets are a prerequiste for optimal and reliable engine performance so we advise you to not skip replacing them on a regular basis.

Questions about the product
 
 
Notes and Safety

Stage6 Sport Pro

The Sport Pro series from Stage6 consists of various CVT components. The variator, clutch, V-belt and complete kit are designed for sport and racing setups.

Stage6 has revised shapes and materials to improve the performance of the CVT compared to the original and to adapt it to the performance increase after installing a sport cylinder.

what does a gasket do?

There are many different types of gaskets or gasket sets in an engine, e.g. cylinder gaskets, intake gaskets, oil seals, crankcase gaskets, exhaust gaskets, carburetor gaskets or engine gasket sets. They all have the same function: to prevent leakage between components.

When and why should you change an engine gasket?

When servicing your two-wheeler or noticing leaking fluids, be sure to follow this one important rule: Always replace an old gasket with a new gasket.
Damaged or worn gaskets can no longer do their job properly, the parts that have to be sealed are no longer adequately sealed, which can lead to serious follow-up damages.

Before you install a new gasket, you must thoroughly clean and degrease the sealing surface.

You can also use silicone sealant as an alternative to paper or metal gaskets in some cases. But beware, O-rings and oil seals cannot be replaced by sealant.

Tuning Level: Sport

We categorize our products into different performance levels  Original, Sport, Racing and High End , so that our customers can choose the right parts for their setup. It is really important to combine parts that belong to the same tuning level, this is especially true for cylinders, crankshafts and exhausts.

The products listed under Sport yield better performance than Original parts. They may have technical differences, such as the use of higher quality materials, a larger displacement or a performance-enhancing design. They are suitable for everyday use and have a long service life.

Tuning Level: Racing

We categorize our products into different performance levels  Original, Sport, Racing and High End , so that our customers can choose the right parts for their setup. It is really important to combine parts that belong to the same tuning level, this is especially true for cylinders, crankshafts and exhausts.

Racing products are designed for a more extreme uses and are developed primarily for racing. Whether you stay at 50cc or increase the displacement, the corresponding Racing parts produce much higher performance than the original parts in order to achieve maximum power.

Aluminium cylinders

Aluminium cylinders are more powerful than cast iron cylinders, but require more regular maintenance and must be combined with different components such as a reinforced crankshaft and a larger carburetor.

How to run in an aluminium cylinder?

Aluminium cylinders should be run in for about 200 kilometers , and you should use a fully synthetic engine oil.

Note: To ensure optimum performance and reliability, it is advisable to measure the squish clearance. Just have a look at our tutorial How to adjust squish clearance.

Technical details
Cylinder Gasket Set Stage6 MK2 Minarelli LC
Article no.S6-74166ET09
EAN4051272316876
Weight0,02 kg
SeriesSport Pro
BrandStage6
Product typeCylinder gasket set
Tuning levelSport, Racing
Displacement70cc
HomologationECE Homologation
Cylinder materialAluminium
Bore47,6 mm
StrokeOriginal
Conrod lengthStandard
Customer reviews
4
2 Ratings
1
 
0
 
1
 
0
 
0
 
GD
Gregoire D.
Riding style:
Let her rip!
Usage:
Daily
Experience:
Age:
14-25
Product quality:
Value for money:
Expectations met:
Recommendation:
Parfait
Parfait pas comme les autres qu’il ne sont pas des bonne dimension
Write a review
Shopping cart

JavaScript ist in Ihrem Browser deaktiviert.
Bitte aktivieren Sie JavaScript um unseren Webshop nutzen zu können und laden diese Seite erneut.

Back to top
Categories
Products