Stage6 Piston Streetrace 50cc 10mm piston pin Minarelli vertical (Yamaha BW's / Slider)

Stage6 Streetrace

As the name suggests, the Streetrace series was developed for sporty street use. The Stage6 series includes cylinders and exhausts that deliver relatively high performance, but still function reliably in everyday use.

The Stage6 Streetrace series feature the optimum balance between performance and durability to offer scooter and supermoto riders a high level of riding enjoyment even in everyday use.

When to replace the piston?

To find out when the piston on your motorcycle, scooter or moped needs to be replaced, it's best to check your bike's manual. You can also keep an eye out for certain symptoms such as loss of compression, loss of power or oil consumption (only for a four-stroke piston).

Extending Piston life

To extend the life of the piston and reduce cylinder wear, it is recommended that you replace the piston rings on an alternating basis. This method maximizes piston life and improves engine performance.

It is important that you replace cylinder gaskets and piston circlips each time you disassemble the cylinder and piston. Failure to do so can result in oil leaks and engine damage.

Tuning Level: Sport

We categorize our products into different performance levels  Original, Sport, Racing and High End , so that our customers can choose the right parts for their setup. It is really important to combine parts that belong to the same tuning level, this is especially true for cylinders, crankshafts and exhausts.

The products listed under Sport yield better performance than Original parts. They may have technical differences, such as the use of higher quality materials, a larger displacement or a performance-enhancing design. They are suitable for everyday use and have a long service life.

Aluminium cylinders

Aluminium cylinders are more powerful than cast iron cylinders, but require more regular maintenance and must be combined with different components such as a reinforced crankshaft and a larger carburetor.

How to run in an aluminium cylinder?

Aluminium cylinders should be run in for about 200 kilometers , and you should use a fully synthetic engine oil.

Note: To ensure optimum performance and reliability, it is advisable to measure the squish clearance. Just have a look at our tutorial How to adjust squish clearance.