Skip to content
Scooter
50cc Bike
Moped
Motocross
s6-2014003p_007.jpg
s62014003p_s6engrenage.jpg
s6-2014003p_012.jpg
s6-2014003p_007.jpgs62014003p_s6engrenage.jpgs6-2014003p_012.jpg
Stage6
Article no.: S6-2014003P

Primary Transmission Stage6 15/38 Piaggio Zip without counter bearing

RRP
98,50 €
-5% Discount
94,00 €

incl. tax, plus shipping

Availability:
In stock
Dispatch:
Ready for immediate dispatch
Attention!

You did not select a vehicle.
You still want to buy this item?

Attention!

Note: The product does not match the selected vehicle model. Continue anyway? 

You'll get 94 reward points
Share product

Description

Primary Gears Piaggio before 1998

Stage6 Primary Transmission 15/38 (2.53) Piaggio (w/o counter bearing in CVT cover), pre-pressed tuning transmission for changing gear ratio and performance.

  • For Piaggio 1996 - 1998 without counterbalance bearing in CVT case
  • Teeth: 15/38 (1:2.53)
  • Only for scooters with 10" inch tires (Zip) - not for Typhoon / TPH!!
  • Pre-pressed

Note: On vehicles built after August 1998, the shaft the rear pulley is connected to is additionally supported with a needle bearing in the CVT cover. Please check before ordering!

Changing gear ratio

Taller gears reduce the overall gear ratio of your transmission and will result in improved performance. If the engine is powerful enough to pull the taller gears, top speed will not be negatively affected (or can even be increased). OEM engines usually don't have enough power to pull this kind of transmission, so you will need a tuning cylinder.

Unlike most other transmissions, Stage6 transmissions are pre-pressed - and available at a knock-out price!. All you have to do is get take out your old transmission gears and replace them with the new gears, close the cover - done!

To calculate the percent increase of your transmission ratio you need the ratios of both the original and the new tuning gears. Now divide the ratio of the original gearing by the ratio of the tuning gearing, subtract 1 and multiply the result by –100.

Example: ((2.56 : 3.07) –1) x (–100) = 16.62%

Always keep in mind: The smaller the ratio / numerical number, the taller the gears!!!

Questions about the product
 
 
Notes and Safety

Scooter gearbox

The transmission of scooters and some mopeds is located in a case behind the clutch and torque driver and has the function of reducing rpm and ultimately driving the wheel axle.

The transmission of a scooter has a direct influence on top speed. If the engine develops enough power and torque at low rpm, you can choose a longer gear ratio to achieve a higher top speed without any noticeable loss in acceleration.

Please note: if you don't have a press, better choose pre-assembled gears!

Technical details
Primary Transmission Stage6 15/38 Piaggio Zip without counter bearing
Article no.S6-2014003P
EAN4051272112553
Weight0,64 kg
BrandStage6
Product typeTransmission
TypePrimary
AssemblyPre-pressed
Gear ratio15/38 (2,53)
Customer reviews
5
1 Ratings
1
 
0
 
0
 
0
 
0
 
Write a review
Shopping cart

JavaScript ist in Ihrem Browser deaktiviert.
Bitte aktivieren Sie JavaScript um unseren Webshop nutzen zu können und laden diese Seite erneut.

Back to top
Categories
Products