Description
Loctite 648 joining adhesive
LOCTITE 648 is an anaerobic low viscosity, high strength retaining compound.
It can be used to attach gears and sprockets to gear shafts and for bearings.
Why use an additional adhesive?
When mounting bearings in housings or gears on shafts, simple pressing is sometimes not sufficient to prevent the components from rotating (e.g. crankshaft bearings that would slip in the housing).
In this case, it is recommended to fix the relevant parts with adhesive during assembly.
2.2. Labeling elements
Label Elements (CLP):
Hazard pictogram:
GHS5 GHS7
Contains:
- 3,3,5 trimethylcyclohexyl methacrylate
- 2-hydroxyethyl methacrylate
- Acrylic acid
- Hydroxypropyl methacrylate
- Maleic acid
- 2'-phenyl acetohydrazide
- 2,2'-ethylenedioxy diethyl dimethacrylate
Signal word: Danger
Hazard statement:
H315 Causes skin irritation.
H317 May cause allergic skin reactions.
H318 Causes serious eye damage.
H335 May cause respiratory irritation.
H412 Harmful to aquatic life with long lasting effects.
Precautionary statement:
"***" ***For consumer use only: P101 If medical advice is needed, have container or label at hand. P102 Keep out of the reach of children. P501 Dispose of contents/container in accordance with national regulations ***
Precautionary statement: Prevention
P261 Avoid inhalation of vapour.
P273 Avoid release to the environment.
P280 Wear protective gloves/eye protection.
Precautionary statement: Reaction
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue to rinse.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.