Description
Stage6 braided steel brake line
Universal brake line for the rear brake, 200cm long, with 90° and 45° connection.
Advantages of steel braided brake lines
Stage6 has developed this high-quality braided steel brake hose especially for racing to counteract brake fading and pressure point shifting. Minimal tolerances in volume increase and thorough testing of each individual line ensure maximum safety and braking efficiency in every situation.
The use of steel braided lines also prevents excessive expansion of the brake lines, which ultimately leads to better brake response.
Universal brake line Stage6
These lines are universally developed for various vehicles. Please check the angle of your original brake line to ensure that it does not hit anything and is not too short. Due to their connections, they are only partially suitable for all vehicles. The 110 cm long line is intended for the front and the 200 cm long line for the rear.
Brake fluid and new seals can be found under spare parts.
Specifications Stage6 Racing brake line:
- Rear wheel
- Length: 200cm
- 90° + 45° connections
Brake hoses
Brake hoses or brake lines are relatively reliable, but it can happen that they expand too much when the temperature of the brake fluid rises too much, or that they rust when the brake fluid becomes too old.
Brake lines can be replaced with original brake hoses, or with high quality steel braided brake lines that withstand high temperatures, do not expand and do not become porous. This keeps the pressure point and braking power constant.
How to replace Brake lines
Whether on a scooter or a motorcycle, the principle is always the same. Generally, except on vehicles with brake force distributors, the hose connects the brake pump to the brake caliper.
To remove the hose, you need to remove the banjo bolts at both ends. Be careful not to lose the copper washers! Check the condition of the copper washers and replace them if necessary.
The assembly is done in the same way. Note the position of the washers - one between the banjo fitting and the hose, the other between the hose and the caliper or brake pump.
After having tightened everything (usually 20 to 30 N.m and no more), you need to add brake fluid and bleed the brake system using the bleed screw on the caliper.
You can either bleed manually or with a special brake bleeder.
| Brake Hose rear Stage6 200cm, 90 + 45 | |
|---|---|
| Article no. | S6-1416602 |
| EAN | 8000000777645 |
| Weight | 0,11 kg |
| Brand | Stage6 |
| Product type | Brake line |
Spare Parts
- Stage6 R/T
Banjo Bolt Stage6 for R/T 4-piston caliper, w. bleed nipple10,00 €In stockRRP11,50 €-13% DiscountSale - MotoForce
Washer (seal) for banjo bolt, d=10x14x2mm / copper2,80 €In stock - Standard Parts
Banjo Bolt, M10x1.25 / steel, hex head with flange (brake cylinder / caliper)7,60 €In stock