Brake Master Cylinder front radial w/ lever black
incl. tax, plus shipping
Description
Brake pump / brake master cylinder front radial w. lever black.
Perfect combo of brake lever and brake master cylinder if you want to increase braking power and get a nice racing look.
The master cylinder is equipped with a radial brake pump and a piston with a diameter of 17.5 mm. The space required on the cockpit is significantly reduced, which brings the functionality and of course the look even more towards racing.
The brake system is universal and can be mounted on scooters, motorcycles, pit bikes and many other vehicles.
Note: the brake cylinder does not have a mirror mount, so if you want to use your two-wheeler on public roads, you will need to add an additional mount.
Since this is a high performance hydraulic brake system, we recommend using 100% synthetic brake fluid, such as Ipone X-Trem Brake.
- Adjustable
- Radial
- Piston diameter 17,5mm
- Black
- Universal
- Front brake / right side
Brake pump
The brake pump or brake master cylinder is directly connected to the brake, i.e. this is where the pressure is transmitted to the brake caliper when you press the brake lever or brake pedal.
If the brake pump is defective, this is not necessarily noticeable by leaking brake fluid, but by the fact that the brake becomes spongy and soft, which significantly reduces the braking performance.
How to Overhaul a brake pump
For inexpensive brake cylinder repairs, we carry repair kits that include gaskets and all the necessary materials for overhauling and repairing the master cylinder.
You will need to completely disassemble the brake cylinder, disconnect it from the brake hose and remove all clips, snap rings and bolts to remove the seals.
If you can't find a repair kit that fits your model, or if overhauling is too much work for you, you can also buy a complete brake master cylidner in OEM quality, a universal brake pump, or even a racing brake cylinder.
Changing the brake pump
To remove the brake pump, simply disconnect it from the brake line by removing the banjo bolt.
Do not lose the copper washers (and while you're at it check them and replace them if necessary) in order to reattach them later on both sides of the banjo bolt.
Then open the reservoir, fill it with brake fluid and bleed the system.
Brake Master Cylinder front radial w/ lever black | |
---|---|
Article no. | MF45.00101/BK |
EAN | 4051272017575 |
Weight | 0,53 kg |
Brand | MotoForce Racing |
Product type | Brake pump |