Description
Front Brake fitting Derbi / Rieju / Yamaha
Replacement part from Motoforce in OEM quality: front brake master cylinder for many models, such as the Rieju RR, Derbi Senda, Gilera RCR, Yamaha DT and many others.
The brake master cylinder for 50cc motorbikes comes with all the necessary components, including a lever, handlebar mount and brake light switch. It can be used as a universal replacement for a defective brake master cylinder when the original is too expensive or unavailable. Also suitable for custom projects.
Note: When modifying the front brake, always bleed the brake system and fill with new brake fluid.
Warning: The brake master cylinder is sold as a universal replacement part. Its suitability for the vehicle and intended use should be checked before purchase.
Details Universal Brake Master Cylinder
- Replacement for AJP front brake master cylinder
- Handlebar mount: 22 mm
- Color: Black
- Fits many 50cc motorcycles
Brake pump
The brake pump or brake master cylinder is directly connected to the brake, i.e. this is where the pressure is transmitted to the brake caliper when you press the brake lever or brake pedal.
If the brake pump is defective, this is not necessarily noticeable by leaking brake fluid, but by the fact that the brake becomes spongy and soft, which significantly reduces the braking performance.
How to Overhaul a brake pump
For inexpensive brake cylinder repairs, we carry repair kits that include gaskets and all the necessary materials for overhauling and repairing the master cylinder.
You will need to completely disassemble the brake cylinder, disconnect it from the brake hose and remove all clips, snap rings and bolts to remove the seals.
If you can't find a repair kit that fits your model, or if overhauling is too much work for you, you can also buy a complete brake master cylidner in OEM quality, a universal brake pump, or even a racing brake cylinder.
Changing the brake pump
To remove the brake pump, simply disconnect it from the brake line by removing the banjo bolt.
Do not lose the copper washers (and while you're at it check them and replace them if necessary) in order to reattach them later on both sides of the banjo bolt.
Then open the reservoir, fill it with brake fluid and bleed the system.
| Brake Master Cylinder front with mirror mount M10 | |
|---|---|
| Article no. | MF45.00005 |
| EAN | 4051272023446 |
| Weight | 0,50 kg |
| Brand | MotoForce |
| Product type | Brake pump |
