Description
Carbon Cut Out Reeds 0.35 mm
Carbon reed petal sheets from Stage6.
Stage6 0.35 mm carbon reed sheet - the ideal solution if the reed blades are damaged or if you want to try out reeds of a different thickness to change engine behavior. The reed petals are ideally suited for racing and high-end engines; they improve engine response and thus the acceleration.
Advantages Reed sheet
A sheet from which you can cut out your own blades has various advantages. You can easily cut reeds for a wide variety of reed valve types, whether for scooters, motorcycles, mopeds or other vehicles with a reed valve. In addition, one sheet produces several plates, which is practical and saves money.
Cutting reed blades to size
Cutting out is very easy. We recommend that you first remove the original reeds to use as a template. You can then simply cut the new petals to size using scissors or a high-quality cutter knife. In some cases, slight sanding of the corners may be necessary to ensure a perfect seal with the reed valve block.
Details reed petal Sheet:
- Number of sheets: x2
- Thickness: 0.35 mm
- Material: Carbon
- Dimensions: 95 x 95 mm
- For cutting out
Reed Blades
On motorcycles, mopeds and scooters, you can replace the entire reed valve to get more power, but you can also simply repair or upgrade the original valve by replacing the reeds.
There are reed petals made of metal, fiberglass and carbon in various thicknesses. There are pre-cut reed blades for specific models or universal reed sheets that you can cut yourself.
thickness of Reed Petals
Simply put, the larger the piston, the thicker the plates should be.
However, you should also consider the operating speed of the engine. The more power the engine has at high rpm, the more we recommend thicker reeds. And vice versa, engines with rather low power speed need thinner plates.
Bad Reed Symptoms
When the reed petals are broken or worn out, it will affect the intake of mixture. The symptoms: poor starting behavior, unclean running at low rpm, the engine may even rev up by itself.
You can easily tell if the reeds are no longer closing properly by simply looking at them. Remove the reed valve block, hold it under a light source, if you see a light gap, the reeds are not closing properly.
Note: always make sure that the reed valve gasket is in perfect condition.
Carbon Fiber Sheet 0,35mm Stage6 cut out | |
---|---|
Article no. | S6-325001 |
EAN | 4051272027284 |
Weight | 0,01 kg |
Brand | Stage6 |
Product type | Reed petals |
Petal material | Carbon |
Petal thickness | 0.35 mm |