Chain Kit 12x56 - 428 Sherco 50 after 2003
incl. tax, plus shipping
Description
Chain kit 12X56 428 Sherco 50
Chain drive kit with chain, front sprocket and rear sprocket at a top price. Standard chain kit for replacing old and worn components.
The chain and accessories should always be in perfect condition, as worn chains, sprockets and chain wheels can impair the performance of a motorcycle. Damaged, worn chains and sprockets / chain wheels with bent or sharp teeth should be replaced as soon as possible. After fitting, make sure that you set the chain tension correctly to achieve optimum performance.
TECHNICAL DATA chain + sprockets:
- Inner diameter rear sprocket: 110 mm
- Hole spacing rear sprocket: 125 mm
- Hole diameter rear sprocket: 8.5 mm
- Mounting: 3x2 holes
- Number of teeth: 12x56 (original ratio)
- Chain: 428 - 134 links
- Suitable for Sherco SE 2002 - 2007
- Suitable for Sherco SM 2002 - 2008
Note: As we cannot tell you with 100% certainty which chain and sprocket will fit a specific model, you should compare the original parts with the illustration and the specifications.
Complete chain Kit
The chain set includes the main components of the chain drive, which are used to transmit the engine power to the rear wheel. Chain kits consist of the following parts: Front sprocket, rear sprocket and chain. You can buy these parts separately or as a complete chain set.
How can I tell that my chain set needs to be replaced?
There are several signs that may indicate that a chain kit needs to be replaced:
- Metallic rattling
- Worn sprocket teeth
- Loose chain that can no longer be properly adjusted
- Difficulty shifting gears or accelerating
- Signs of rust on the chain or sprockets
It is recommended to regularly check and maintain the condition of the chain kit and replace it if there are visible signs of wear.
gear ratio
The transmission ratio of the chain drive is the ratio between the front and rear sprocket. It is calculated as follows: Number of teeth of rear sprocket / Number of teeth of front sprocket. A low ratio increases speed, a high ratio increases acceleration.
Example: 15-tooth front sprocket and 53-tooth rear sprocket: 53/15 = 3.53 gear ratio