Description
Cylinder d.38mm Airsal Alu 50cc Tomos A35, aluminium sport cylinder made with hard coated running track from Airsal. Aluminium cylinders provide optimal heat dissipation, which is a great advantage especially for tuned engines.
The aluminium kit for Tomos will get you a noticeable improvement in performance. It is a typical sports cylinder with a strong, powerful profile, especially in the mid-range.
Pistons and gaskets are of course included; a matching tuning reed block is also included. A new, larger carburettor is not necessary, but you should definitely re-adjust it!
- displacement: 49,5cc
- bore: 38mm
- material: aluminium
- without cylinder head
How to Install a cylinder on a scooter, motorcycle or moped
The cylinder or cylinder kit is the heart of the engine on scooters, motorcycles and mopeds. It consists of a cylinder, a piston with piston ring(s), a cylinder head and gaskets needed for installation.
The service life of a cylinder depends on whether it has been fitted correctly.
Tuning Level: Sport
We categorize our products into different performance levels Original, Sport, Racing and High End , so that our customers can choose the right parts for their setup. It is really important to combine parts that belong to the same tuning level, this is especially true for cylinders, crankshafts and exhausts.
The products listed under Sport yield better performance than Original parts. They may have technical differences, such as the use of higher quality materials, a larger displacement or a performance-enhancing design. They are suitable for everyday use and have a long service life.
Aluminium cylinders
Aluminium cylinders are more powerful than cast iron cylinders, but require more regular maintenance and must be combined with different components such as a reinforced crankshaft and a larger carburetor.
How to run in an aluminium cylinder?
Aluminium cylinders should be run in for about 200 kilometers , and you should use a fully synthetic engine oil.
Note: To ensure optimum performance and reliability, it is advisable to measure the squish clearance. Just have a look at our tutorial How to adjust squish clearance.
