Description
Cylinder Doppler ER1 Alu 50cc MBK 51 LC
Cylinder Doppler aluminium 50cc MBK 51, aluminum cylinder with Nikasil coating with 6 transfer ports and an exhaust with boost ports. The cylinder comes with a 1-ring piston, with original 13mm piston pin.
The kit has very good torque in the mid rpm range and lots of power at the higher speed range. Excellent (light) tuning / sport cylinder that can almost be classified as a racing cylinder.
We recommend using a 15 mm carburetor and a tuning exhaust.
Note: The cylinder is sold without a cylinder head, simply use the original head. You can find the version with cylinder head under ref. CGN504020.
How to Install a cylinder on a scooter, motorcycle or moped
The cylinder or cylinder kit is the heart of the engine on scooters, motorcycles and mopeds. It consists of a cylinder, a piston with piston ring(s), a cylinder head and gaskets needed for installation.
The service life of a cylinder depends on whether it has been fitted correctly.
Tuning Level: Racing
We categorize our products into different performance levels Original, Sport, Racing and High End , so that our customers can choose the right parts for their setup. It is really important to combine parts that belong to the same tuning level, this is especially true for cylinders, crankshafts and exhausts.
Racing products are designed for a more extreme uses and are developed primarily for racing. Whether you stay at 50cc or increase the displacement, the corresponding Racing parts produce much higher performance than the original parts in order to achieve maximum power.
Aluminium cylinders
Aluminium cylinders are more powerful than cast iron cylinders, but require more regular maintenance and must be combined with different components such as a reinforced crankshaft and a larger carburetor.
How to run in an aluminium cylinder?
Aluminium cylinders should be run in for about 200 kilometers , and you should use a fully synthetic engine oil.
Note: To ensure optimum performance and reliability, it is advisable to measure the squish clearance. Just have a look at our tutorial How to adjust squish clearance.
