Description
Cylinder Kit Polini 80cc Series 6000 48mm Zündapp Corsa 50
Racing aluminium cylinder from Polini with 80cc displacement and 41.60mm stroke. Fits all air-cooled Zündapp 50cc engines, series 500 with 46x46mm stud spacing.
Note: the cylinder base has a diameter of 53mm.
Displacement: 80cc
Bore: 48mm
Stroke: 41.60mm
Compression 13,8:1
Max. torque: 9.800 rpm
Power: 10 - 15 hp
How to Install a cylinder on a scooter, motorcycle or moped
The cylinder or cylinder kit is the heart of the engine on scooters, motorcycles and mopeds. It consists of a cylinder, a piston with piston ring(s), a cylinder head and gaskets needed for installation.
The service life of a cylinder depends on whether it has been fitted correctly.
Tuning Level: Racing
We categorize our products into different performance levels Original, Sport, Racing and High End , so that our customers can choose the right parts for their setup. It is really important to combine parts that belong to the same tuning level, this is especially true for cylinders, crankshafts and exhausts.
Racing products are designed for a more extreme uses and are developed primarily for racing. Whether you stay at 50cc or increase the displacement, the corresponding Racing parts produce much higher performance than the original parts in order to achieve maximum power.
Aluminium cylinders
Aluminium cylinders are more powerful than cast iron cylinders, but require more regular maintenance and must be combined with different components such as a reinforced crankshaft and a larger carburetor.
How to run in an aluminium cylinder?
Aluminium cylinders should be run in for about 200 kilometers , and you should use a fully synthetic engine oil.
Note: To ensure optimum performance and reliability, it is advisable to measure the squish clearance. Just have a look at our tutorial How to adjust squish clearance.
Cylinder Polini 80cc Series 6000 48mm Zündapp Corsa 50 | |
---|---|
Article no. | P168.6006 |
EAN | 8054705040511 |
Weight | 3,60 kg |
Series | Serie 6000 |
Brand | Polini |
Product type | Cylinder kit |
Tuning level | Racing |
Displacement | 80cc |
Homologation | No |
Piston pin | 12 mm |
Cylinder material | Aluminium |
Bore | 48 mm |
Stroke | 41,6 mm |