Description
Malossi V-belt X Special Minarelli
X-Special belt from Malossi for scooters with Minarelli short engines.
Advantages of the X-K Belt from Malossi
This belt, specially developed for Sport and MidRace engines, has top grip even in cold temperatures and with a cold engine thanks to its soft rubber. This belt is slightly wider, which increases the top speed a little.
Malossi drive belt dimensions:
- Length: 793 mm
- Width: 16.8 mm
- Height: 8 mm
- Angle: 26°
- For Minarelli horizontal with short engine block
When to change the V-belt?
On scooters, the engine power is transmitted to the rear wheel via the V-belt or drive belt, which connects the CVT variator to the torque drive. As a rule, it should be replaced every 10,000 to 20,000 km. The belt slips when it is heavily worn. By the way, a new belt also slips and needs a short run-in period.
How to change the drive belt?
Replacing the V-belt is a relatively easy, you don't need advanced technical know-how. The first step is to remove the variator cover to get to the variator. You'll need a piston stopper and a blocking tool to remove the CVT and clutch bell. You can then remove the worn V-belt and replace it with the new one. When reassembling, make sure that the V-belt is properly seated and has the correct tension.
Here's a little tutorial on How to change the CVT and drive belt (English Subs).