Description
Scooter belt 787 mm
High quality drive belt from NARAKU. High grip and high flexibility minimize friction losses and transfer the engine power optimally to the road.
The V-belt is not only a wearing part that needs to be replaced regularly, but can also affect performance and should therefore be selected carefully.
Dimensions of the Naraku V-belt:
- Dimensions: 787 x 16 x 30 mm
- For Minarelli short 2-stroke: Fizz, Sonic, F10 ..etc.
- For Minarelli 4-stroke: Nitro 4-stroke, Aerox 4-stroke, Ovetto 4-stroke ..etc.
- Replaces OEM part number: 61B-12211-00-00
- Replaces OEM part number: 22500-E01-000
When to change the V-belt?
On scooters, the engine power is transmitted to the rear wheel via the V-belt or drive belt, which connects the CVT variator to the torque drive. As a rule, it should be replaced every 10,000 to 20,000 km. The belt slips when it is heavily worn. By the way, a new belt also slips and needs a short run-in period.
How to change the drive belt?
Replacing the V-belt is a relatively easy, you don't need advanced technical know-how. The first step is to remove the variator cover to get to the variator. You'll need a piston stopper and a blocking tool to remove the CVT and clutch bell. You can then remove the worn V-belt and replace it with the new one. When reassembling, make sure that the V-belt is properly seated and has the correct tension.
Here's a little tutorial on How to change the CVT and drive belt (English Subs).
