Exhaust Stage6 R/T FL 100cc
Description
Exhaust Stage6 R/T FL 100cc, high-end exhaust from 2-stroke tuning expert Stage6 R/T, designed and built for FL cylinders.
It is a classic racing exhaust made of carefully hand-welded thin steel sheet cones, made in Italy. As is normal for high-end systems, the exhaust has a so-called racing finish, which means the body is unpainted and untreated. We recommend to apply grease spray regularly to avoid premature rusting. The exhaust comes with a high quality carbon silencer.
Shape and volume have been specially developed to optimally support the Stage6 R/T FL100 cylinder, cylinder and exhaust combined will get you maximum performance. The flange is not included with the exhaust since it is already part of the R/T FL100 cylinder kit. This Stage6 R/T exhaust is aimed at ambitious tuners and racers who want to crank up the power output of their scooter as much as possible.
Please note: In order to use this Stage6 R/T FL100 exhaust with other FL cylinders, you'll have to use an Exhaust Flange Kit Stage6 R/T 100cc FL.
- adapted to the port timings of the S6 R/T FL100 cylinder
- flange not included
- curved stinger pipe (racing version)
- carbon silencer
- designed for mounting on Malossi crankcases
- racing exhaust: no homologation / not road-legal
Exhaust scooter, moped, motorcycle
The exhaust has a major influence on the performance of scooters and mopeds. By replacing the original with a tuning exhaust, you can improve the gas flow and increase the engine power.
exhaust parts
- The headpipe or header is the connection between cylinder and exhaust, and an exhaust gasket provides the necessary seal. In street-legal systems, the headpipe is equipped with a legally required restriction. Some people remove this restrictor to increase power.
- The actual exhaust body or expansion chamber is connected to the header pipe. In a classic 2-stroke expansion chamber type exhaust, gas pressure waves are used to improve engine performance.
- At the end there us the silencer or muffler that discharges the exhaust gases and, with the help of damping wool, also reduces the noise generated by the vehicle.
Replacing the exhaust
For 2-stroke engines, various settings and components usually need to be adjusted when the original exhaust is replaced with a tuning version. These changes include:
- Adjusting the carburetor by replacing the main jet.
- Upgrading the clutch or replacing the clutch springs.
- For scooters, it may be necessary to reduce the weight of the variator weights.
| Exhaust Stage6 R/T FL 100cc | |
|---|---|
| Article no. | S6-9616620 |
| EAN | 4051272012549 |
| Weight | 1,51 kg |
| Series | R/T |
| Brand | Stage6 R/T |
| Product type | Exhaust |
| Homologation | No |
Spare Parts
- Stage6 R/T
Exhaust Flange Kit Stage6 R/T 100cc FL37,50 €In stockRRP39,00 €-4% Discount - Stage6 R/T
O-Rings + Mounting Kit exhaust flange Stage6 R/T 100cc FLR6,50 €In stockRRP7,20 €-10% Discount - Stage6 R/T
Exhaust Spring stainless steel 55mm for Stage6 R/T FL 100cc3,50 €In stock soonRRP3,60 €-3% Discount - Stage6 R/T
Silencer Stage6 R/T for R/T Exhaust 90cc / 100cc145,00 €In stock soonRRP152,00 €-5% Discount - Stage6 R/T
Silentblock Stage6 M6 25x15,5mm6,50 €In stock soonRRP7,20 €-10% Discount
