Description
Studs M6 - M7
Set of two stud bolts for exhaust or intake manifold, with M6 thread on one side and M7 thread on the other, including two M6 nuts.
You have two options:
- Firstly, as an emergency solution if the threads in the cylinder are damaged. You then have the option of turning the thread back to M7.
- Secondly, the stud bolts can be reversed to fit an exhaust flange with a wider mount than usual.
You can of course use the stud bolts anywhere else as well.
Details stud bolts M6 - M7:
- Stud bolt M6 / M7
- Height of nuts: 30 mm
- Nut M6 (x2)
Stud bolts
In simple terms, a stud bolt is a type of bolt with a thread on both ends. One thread is screwed into e.g. the housing, the other thread is used to fasten another component.
There are many bolts and studs with many different functions in an engine. Studs are screwed into a cast piece and another part is attached to it by securing it with a nut.
Useful note: It is advisable not to use threadlocker. To install studs, the "nut / locknut" method must be used (a nut locked against another nut allows the stud to be pulled into the desired part).
If you have the manufacturer's information, you can tighten the studs to the recommended torque.
Stud Bolts in our store:
In our store you will find mainly cylinder studs and exhaust studs for scooters, 50cc motorcycles and motocross machines.
Make sure you choose the right stud bolts for your vehicle by selecting the right model in the configurator or by measuring the pitch and length of the studs.