Description
Motor Oil 4-stroke Motul 300V Factory Line 10W-40 4L. For racing use.
The high-performance oil was specially developed for factory racing teams. Suitable for high performance 4-stroke engines (integrated or non-integrated gearbox, with oil bath or dry clutch) that are built to deliver maximum power at high temperatures and over a wide rpm range: Speed Bikes, SuperSport, SuperBike, Endurance, Hillclimbing....
Can also be used for bikes with catalytic converters, quads and other 4strokes.
MOTUL has been developing high performance ester based lubricants for several decades. This selection of esters combined with other high performance synthetic base oils and an innovative additive package forms the so-called E-Technology. This technology gets the maximum performance out of engines without compromising reliability and wear. The result is a power increase of over 1.3% while maintaining wet clutch efficiency.
APPLICATION NOTES
For optimum engine and clutch performance, avoid blending with other synthetic or mineral oils.
Oil change: Adjust according to use.
PROPERTIES
- Colour Yellow / Green
- Viscosity SAE J 300 10W-40
- Density at 20°C (68°F) ASTM D1298 0,852
- Viscosity at 40°C (104°F) ASTM D445 82.1 mm²/s
- Viscosity at 100°C (212°F) ASTM D445 13.1 mm²/s
- Viscosity index ASTM D2270 160
- Pour point ASTM D97 -36°C / -32.8°F
- Flash point ASTM D92 250°C / 482°F
- TBN ASTM D2896 8.3 mg KOH/g
Please take note of the Waste Oil Ordinance!
2.1. Classification of the substance or mixture
Complies with Regulation (EC) No 1272/2008 and its adaptations.
This mixture does not present a physical hazard. See recommendations for other products on site.
This mixture does not present a health hazard except for possible occupational exposure limit exceedances (see sections 3 and 8).
This mixture does not present an environmental hazard. Under normal conditions of use, there is no known or foreseeable adverse effect on the environment.
2.2. Label elements
Complies with Regulation (EC) No 1272/2008 and its adaptations.
No labeling is required for this mixture.
2.3. Other hazards
The mixture does not contain any "Substances of Very High Concern" (SVHC) >= 0.1 % published by the European Chemical Agency (ECHA) according to the Article 57 of REACH: http://echa.europa.eu/fr/candidate-list-table
The mixture does not meet the criteria applied to PBT and vPvB mixtures, according to Annex XIII of the
REACH Directive (EC) No. 1907/2006.
| Motor Oil 4-stroke Motul 300V Factory Line 10W-40 4L | |
|---|---|
| Article no. | OMOT104121 |
| EAN | 3374650301082 |
| Weight | 3,70 kg |
| Series | 300V |
| Brand | Motul |
| Product type | 4-stroke oil |
| Viscosity | 10W40 |
