Skip to content
Scooter
50cc Bike
Moped
Motocross
Spray paint Motip Primer unpainted Matte
Motip
Article no.: MOTIP4623

Primer Spray Pro MoTip grey 500ml

12,00 €
24,00 € / 1 L

incl. tax, plus shipping

Availability:
In stock
Dispatch:
Immediate
Attention!

You did not select a vehicle.
You still want to buy this item?

Attention!

Note: The product does not match the selected vehicle model. Continue anyway? 

You'll get 12 reward points
Share product

Description

MOTIP All-Purpose Primer grey, 500ml, nitro-based primer for preparing all kinds of surface before painting them. Primers ensure better adhesion of paint to the surface and increase paint durability. Moreover, you should apply a clear coat at the end, for perfect finish and protection of paint.

Details:

- gray
- 500ml

Questions about the product
 
 
Downloads and Media
Notes and Safety

Spray Paints

Although our spray paints are mostly  universal paints that can be used on all surfaces, there are also special paints for rims, for parts exposed to extreme heat, rust protection paints, etc. In all cases, the surface must be properly prepared before applying the spray paint.

Painting with spray Paint

Preparation

  1. Before the new paint is applied, you must sand the surface! The surface cannot be smooth and shiny, but has to be relatively rough, so that the paint adheres well.
  2. Also make sure that the surface is degreased. Use a strong grease-dissolving product like brake cleaner.
  3. Cover the areas you don't want to paint with masking tape; it's best to mask generously.
  4. To make the paint look as specified and even, you should also apply a coat of primer. Make sure that the primer matches the material: For plastic parts, use a special plastic primer.
  5. Apply the primer in a dry and dust-free place.

Painting

  1. Read the instructions on the spray can carefully. You will usually find useful information, such as the distance from which to spray, the recommended temperature range, etc....
  2. It is best to spray in a dry, dust-free and ventilated place.
  3. Apply several coats to get an intense and even color. Tip: Apply thin coats and be sure to follow the drying times to avoid running!

Finishing

For a perfect finish, you can also apply a layer of clear coat, gloss or matte depending on the look you prefer.
Again, make sure you choose the right type of paint: For example, if you used acrylic paint, you'll need an acrylic clear coat. For components that are exposed to high temperatures, you will need heat-resistant high-temperature paint.

Paint care

To ensure that your paint job stays clean and shiny, you should store your vehicle in the shade in the summer and dry in the winter.
Storing it in a garage will protect the paint from aggressive UV rays and the elements. Alternatively, you can also use a bike cover or mobile garage.

Always clean your scooter, moped or motorcycle with suitable cleaning agents and soft, clean sponges, brushes and cloths. You can also use paint protection to keep the fairing clean and shiny.

If a simple cleaning is no longer enough to bring the surfaces back to a high gloss, you can use paint polish to refresh the colours.

1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Aerosol - 1 - H222-H229 Extremely flammable aerosol. Pressurized container: may burst if heated.
Eye Irrit. - 2 - H319 Causes severe eye irritation.
STOT SE - 3 - H336 May cause drowsiness and dizziness.
Aquatic Chronic - 3 - H412 Harmful to aquatic life with long lasting effects.

2. Label elements
Labeling according to Regulation (EC) No. 1272/2008
The product is classified and labeled according to the CLP Regulation.
Hazard pictograms

GHS02 - GHS07
Signal word Danger

Hazard-determining components of labeling:
Acetone
n-Butyl acetate
2-methoxy-1-methylethyl acetate

Hazard statements
H222-H229 Extremely flammable aerosol. Container is pressurized: may burst if heated.
H319 Causes severe eye irritation.
H336 May cause drowsiness and dizziness.
H412 Harmful to aquatic life with long lasting effects.

Precautionary statements
P101 If medical advice is needed, have container or label at hand.
P102 Keep out of the reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P260 Do not breathe aerosol.
P410+P412 Protect from sunlight. Do not expose to temperatures above 50 °C.
P501 Dispose of contents/container in accordance with regional regulations.

Additional information:
EUH066 Repeated exposure may cause skin dryness or cracking.
EUH208 Contains maleic anhydride, N-formylmorpholine. May cause allergic reactions.
Formation of explosive mixtures possible without adequate ventilation.

3 Other hazards
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.

Technical details
Primer Spray Pro MoTip grey 500ml
Article no.MOTIP4623
EAN8711347040544
Weight0,60 kg
FinishMatte
SeriesPrimer
Paint typePrimer
BrandMotip
Product typeSpray paints
Colourunpainted
Colour versionunpainted
Customer reviews
5
1 Ratings
1
 
0
 
0
 
0
 
0
 
Write a review
Shopping cart

JavaScript ist in Ihrem Browser deaktiviert.
Bitte aktivieren Sie JavaScript um unseren Webshop nutzen zu können und laden diese Seite erneut.

Back to top
Categories
Products