Description
Rear Caliper AJP Type for Sherco 50
Cost-effective alternative to the original part: rear brake caliper for Sherco 50cc models. The brake caliper mounts easily without modifications. Includes the mounting plate, organic brake pads, the banjo bolt plus seals, and the bleed screw.
Please note that bleeding the brake system is required when replacing the caliper. If you are unsure how to bleed a brake, contact a professional workshop. Always use fresh brake fluid.
Compatibility
- Sherco 50cc with AJP caliper
Note: Please compare your brake caliper with the image before purchasing, as brake parts may vary depending on model and year of manufacture.
Details AJP Brake Caliper Sherco
- Rear brake caliper type AJP
- Mounting plate included
- For 17 mm wheel axle
- Supplied with brake pads, banjo bolt, and bleed screw
Brake caliper
The brake caliper is an important part of the braking system. The brake pads are located in the caliper and are "clamped" by the caliper piston. The piston is driven by the brake fluid and presses the brake pads against the brake disc.
The brake caliper must always be in good condition and must not leak. If you want to repair the caliper on a small budget, you can use one of the many caliper repair kits from major brands like Brembo, AJP, Nissin, etc.
Racing caliper
After tuning measures, where the performance of a motorcycle is increased, the brakes must also be readjusted. You can install oversize kits instead of the original brake discs, or use racing calipers with multiple or larger pistons. Some tuning calipers are made of materials that allow better heat dissipation.
Especially for enduro and motocross bikes, there are various caliper upgrade kits. There are also complete brake kits with brake disc, brake pads, caliper, brake line and brake master cylinder.
For 50cc scooters and motorcycles, we offer 2-piston calipers that considerably improve braking performance. Most calipers are universal and are adapted to a specific vehicle via a brake caliper adapter.
Changing a brake caliper
To install a brake caliper, you need relatively few tools. However, you should make sure that the copper washers on the banjo bolt that holds the brake hose are in perfect condition so that no fluid can leak out.
You'll also need new brake fluid, as you'll need to bleed the brake system. You must remove all air bubbles from the system; you can bleed manually or with a special brake bleeder.
| Rear Brake Caliper AJP Sherco 50 | |
|---|---|
| Article no. | AJP-168708 |
| EAN | 3700948238943 |
| Weight | 0,50 kg |
| Brand | AJP |
| Product type | Brake caliper |
| Colour | Grey |