Standard Parts
Article no.: STR-180.01/BK
Seat Cover double black Malaguti F12 2 places
18,50 €
incl. tax, plus shipping
Share product
Description
Seat cover Malaguti F12
If the seat cover is worn or broken, you can replace it with this black Malaguti F12 2-seater seat cover up to model year 1998.
Replacing the seat cover
To fit the new cover, you only need to follow a few steps:
- Remove the seat.
- Check whether the new cover really fits by placing it over the seat bench on a trial basis.
- Use a flat screwdriver and pliers to remove the clips and the cover
- Put on the new cover
- Cover the front first, making sure it is positioned correctly
- Pull the cover backwards and pull it over the back
- Staple the sides in place, tightening the cover and working from front to back (3/4 staples on the right, then on the left, etc.)
- When the cover is taut and stapled in place, cut off any excess material with a cutter or scissors if necessary
- Refit the seat to the two-wheeler.
Compatible models:
- Malguti F12 up to 1998
ATTENTION: Not suitable for F12 R!
Questions about the product
Manufacturer's Details
MOKIX/Bouwman Import
Oude IJsselweg 14
7075 DL Etten
Netherlands
service@bouwman-import.nl
https://www.mokix.com Notes and Safety
Seat cover
No matter if you want to replace the worn original seat cover or want to customize your motorcycle, scooter or moped by adding a custom cover - this is a short tutorial on how to replace a seat cover.
Tools needed to change the seat cover:
- Tool to remove the seat cover.
- Flat screwdriver to lift the clamps.
- Pliers to remove the staples.
- Stapler (wooden stapler or wall stapler) to attach the new cover.
- Cutter knife to cut off excess fabric.
- A heat gun can be used to remove wrinkles caused during storage.
Change seat cover:
To install the new cover, proceed as follows:
- Remove the seat.
- Make sure the new seat cover fits by placing it over the seat.
- Using a flathead screwdriver and pliers, remove the staples from the existing cover.
- Place the new cover on top of the seat foam.
- Staple the front part of the cover, making sure it fits properly.
- Pull the cover back and staple the back part in place once the cover is a perfect fit.
- Staple the side parts one by one from the front to the back, pulling the cover taut.
- If necessary, cut off excess material parts with a cutter knife or scissors.
- Reassemble the seat on the vehicle.
Technical details
| Seat Cover double black Malaguti F12 2 places | |
|---|---|
| Article no. | STR-180.01/BK |
| EAN | 7421082093460 |
| Weight | 0,30 kg |
| Brand | Standard Parts |
| Product type | Seat cover |
| Colour | Black |
| Colour variant | Black |