Standard Parts
Article no.: STR-180.01/BK
Seat Cover double black Malaguti F12 2 places
18,00 €
incl. tax, plus shipping
You'll get 18 reward points
Share product
Description
Seat cover Malaguti F12
If the seat cover is worn or broken, you can replace it with this black Malaguti F12 2-seater seat cover up to model year 1998.
Replacing the seat cover
To fit the new cover, you only need to follow a few steps:
- Remove the seat.
- Check whether the new cover really fits by placing it over the seat bench on a trial basis.
- Use a flat screwdriver and pliers to remove the clips and the cover
- Put on the new cover
- Cover the front first, making sure it is positioned correctly
- Pull the cover backwards and pull it over the back
- Staple the sides in place, tightening the cover and working from front to back (3/4 staples on the right, then on the left, etc.)
- When the cover is taut and stapled in place, cut off any excess material with a cutter or scissors if necessary
- Refit the seat to the two-wheeler.
Compatible models:
- Malguti F12 up to 1998
ATTENTION: Not suitable for F12 R!
Questions about the product
Notes and Safety
Seat cover
No matter if you want to replace the worn original seat cover or want to customize your motorcycle, scooter or moped by adding a custom cover - this is a short tutorial on how to replace a seat cover.
Tools needed to change the seat cover:
- Tool to remove the seat cover.
- Flat screwdriver to lift the clamps.
- Pliers to remove the staples.
- Stapler (wooden stapler or wall stapler) to attach the new cover.
- Cutter knife to cut off excess fabric.
- A heat gun can be used to remove wrinkles caused during storage.
Change seat cover:
To install the new cover, proceed as follows:
- Remove the seat.
- Make sure the new seat cover fits by placing it over the seat.
- Using a flathead screwdriver and pliers, remove the staples from the existing cover.
- Place the new cover on top of the seat foam.
- Staple the front part of the cover, making sure it fits properly.
- Pull the cover back and staple the back part in place once the cover is a perfect fit.
- Staple the side parts one by one from the front to the back, pulling the cover taut.
- If necessary, cut off excess material parts with a cutter knife or scissors.
- Reassemble the seat on the vehicle.
Technical details
| Seat Cover double black Malaguti F12 2 places | |
|---|---|
| Article no. | STR-180.01/BK |
| EAN | 7421082093460 |
| Weight | 0,30 kg |
| Brand | Standard Parts |
| Product type | Seat cover |
| Colour | Black |
| Colour version | Black |