Silicone Sealant CAF 4 100g white
Description
Silicone Sealant CAF 4 100g white – for sealing and bonding between materials, especially in areas that are subject to thermal stress / heat. The CAF4 paste remains liquid for a while, leaving some time to assemble and bond parts such as reed valve or exhaust.
CAF 4 is a one component silicone elastomer which cures at room temperature. It is self-levelling, quick-curing, has very good mechanical properties, good heat stability and provides good electrical insulation (dielectric).
Technical specifications:
- Skin formation time: 10 minutes
- Curing time: 5 hours
- Temperature range: -65 °C to +250 °C
- Tensile strength: 3.8 Mpa
Sealing compound
As the name suggests, sealant is used to seal components. There are different brands, compositions, applications, colours and more or less heat-resistant type of sealant.
Liquid sealants and silicones are an absolute must-have for every workshop, but they are only really necessary in certain cases. Most of the time, they are first and foremost repair aids and do not replace a real repair job.
Therefore, it is usually better to use the intended special seals and gaskets, even if silicone and sealant well help to seal the parts.
Please note that sealants and silicones cannot be used everywhere! They, for example, cannot replace oil seals or O-rings.
1 Classification of the substance or mixture
The product has been classified according to the legislation in force.
Classification according to (EC) Directive 1272/2008 as amended.
Health hazards
Eye Irritation - Category 2 - H319: Causes severe eye irritation.
Specific target organ toxicity - repeated exposure - category 1 - H372: Causes damage to organs through prolonged or repeated exposure.
2 Label elements
Signal word(s): Warning
Hazard statement(s): H319: Causes severe eye irritation.
Safety advice
Prevention: P280: Wear protective gloves/protective clothing/eye protection/face protection.
Reaction:
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue to rinse.
P337+P313: If eye irritation persists: Get medical advice/attention.
Hazard summary
Physical Hazards: No specific recommendations.
Health Hazards
Inhalation: Quartz/Cristobalite : Fibers entrapped in polymer are not expected to present a health hazard as long as they are handled under normal conditions of use
normal conditions of use. Although the product is classified according to EU criteria, according to Article 23 and Annex
1 (Section 1.3.4.1) of Directive n°1272/2008, no labeling is required.
Eye contact: Causes severe eye irritation.
Skin contact: No information on specific symptoms.
Ingestion: No information on specific symptoms.
Other health effects: No data on further information.
Environmental hazards: Not considered to be hazardous to the environment.
3 Other hazards
Meet PBT (persistent/bioaccumulative/toxic) criteria
Meet vPvB criteria
Silicone Sealant CAF 4 100g white | |
---|---|
Article no. | EKP-8791 |
EAN | 3700948127391 |
Weight | 0,12 kg |
Brand | Standard Parts |
Product type | Sealing paste |