Description
Silver/aluminium
Spray Paints
Although our spray paints are mostly universal paints that can be used on all surfaces, there are also special paints for rims, for parts exposed to extreme heat, rust protection paints, etc. In all cases, the surface must be properly prepared before applying the spray paint.
Painting with spray Paint
Preparation
- Before the new paint is applied, you must sand the surface! The surface cannot be smooth and shiny, but has to be relatively rough, so that the paint adheres well.
- Also make sure that the surface is degreased. Use a strong grease-dissolving product like brake cleaner.
- Cover the areas you don't want to paint with masking tape; it's best to mask generously.
- To make the paint look as specified and even, you should also apply a coat of primer. Make sure that the primer matches the material: For plastic parts, use a special plastic primer.
- Apply the primer in a dry and dust-free place.
Painting
- Read the instructions on the spray can carefully. You will usually find useful information, such as the distance from which to spray, the recommended temperature range, etc....
- It is best to spray in a dry, dust-free and ventilated place.
- Apply several coats to get an intense and even color. Tip: Apply thin coats and be sure to follow the drying times to avoid running!
Finishing
For a perfect finish, you can also apply a layer of clear coat, gloss or matte depending on the look you prefer.
Again, make sure you choose the right type of paint: For example, if you used acrylic paint, you'll need an acrylic clear coat. For components that are exposed to high temperatures, you will need heat-resistant high-temperature paint.
Paint care
To ensure that your paint job stays clean and shiny, you should store your vehicle in the shade in the summer and dry in the winter.
Storing it in a garage will protect the paint from aggressive UV rays and the elements. Alternatively, you can also use a bike cover or mobile garage.
Always clean your scooter, moped or motorcycle with suitable cleaning agents and soft, clean sponges, brushes and cloths. You can also use paint protection to keep the fairing clean and shiny.
If a simple cleaning is no longer enough to bring the surfaces back to a high gloss, you can use paint polish to refresh the colours.
2.1 Classification of the substance or mixture
· Classification according to Regulation (EC) No. 1272/2008
GHS02 Flame
Aerosol 1 H222-H229 Extremely flammable aerosol. Pressurized container: may burst if heated
burst.
GHS07
Eye Irrit. 2H319 Causes serious eye irritation.
STOT SE 3H336 May cause drowsiness or dizziness.
· 2.2 Labeling elements
· Labeling in accordance with Regulation (EC) No. 1272/2008
The product is classified and labeled in accordance with the CLP Regulation.
(Continued on page 2)
DE
Page: 2/12
Safety Data Sheet
in accordance with Regulation (EC) No. 1907/2006, Article 31
Print date: April 25, 2024; revised on: February 27, 2024; Version No. 64 (replaces Version 63)
Trade Name: MOTIP TUNING LINE ENGINE PAINT ALUMINUM 400 ML
(Continued from page 1)
58.0.16
· Hazard pictograms
GHS02 GHS07
· Signal word: Danger
· Hazard-determining components for labeling:
Acetone
C9-C11 hydrocarbons, n-alkanes, isoalkanes, cycloalkanes, <2% aromatics
· Hazard statements
H222-H229 Extremely flammable aerosol. Pressurized container: may burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
· Precautionary statements
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames, and other sources of ignition
. Do not smoke.
P211 Do not spray toward an open flame or other ignition source.
P251 Do not puncture or burn, even after use.
P260 Do not inhale aerosol.
P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C.
P501 Dispose of contents/container in accordance with local regulations.
· Additional information:
EUH066 Repeated contact may cause skin to become rough or cracked.
EUH208 Contains neodecanoic acid and cobalt salt. May cause allergic reactions.
EUH211 Warning! Spraying may produce hazardous respirable droplets. Do not inhale aerosol or
mist.
Explosive mixtures may form without adequate ventilation.
· 2.3 Other Hazards
· Results of the PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· Identification of endocrine-disrupting properties: Not applicable
| Spray Paint Motip engine paint aluminum 400ml | |
|---|---|
| Article no. | MOT4093 |
| EAN | 8711347040933 |
| Weight | 0,79 kg |
| Finish | Matte |
| Series | Engine paint |
| Paint type | High temperature paint |
| Brand | Motip |
| Product type | Spray paint |
| Colour | Silver |
| Colour variant | Aluminium |
| GPSR - Signal word | Danger |