Throttle Cable 850mm / 110mm Pit Bike / Dirt Bike blue
incl. tax, plus shipping
Description
Throttle cable for pit bike / dirt bike
Throttle cable 850 mm / 110 mm for pit bike / dirt bike, replacement cable including blue outer sheath, both in very good quality.
If there are issues when accelerating, for example if the throttle grip becomes stiff or response time is delayed, this may be due to a damaged cable. A properly functioning throttle cable is especially important for racing use; a defective part should be replaced immediately.
It is recommended to apply a few drops of WD40 or a similar lubricant to the inner cable to ensure proper seating and function.
- Length: 850 mm
- Difference throttle cable / sheath: 110 mm
- Color: Blue
Throttle cable for motorcycle, scooter, moped
The throttle cable is a Bowden cable; it consists of a flexible inner cable made of steel wire, which is protected by a protective sleeve. One end is attached to the throttle grip on the handlebar, while the other end is connected to the carburetor.
How does a Throttle cable work?
When you use the throttle grip, the inner cable moves inside the sleeve and transmits the movement to the carburetor slide or injector. This regulates the amount of fuel or air that enters the engine, controlling the speed and acceleration of the vehicle.
Some two-wheelers are equipped with an oil pump, which is also connected through the throttle cable by a splitter.
Changing the throttle cable
Changing the throttle cable is relatively easy, you only need a few tools. The steps are as follows:
- Dismount the throttle grip, fully releasing the cable tensioner and removing the cable clamp.
- Remove the fairing to access the cable.
- Disconnect the cable end and pull it off the throttle slide.
- Install the new cable using the same steps in reverse order. Remember to lubricate the cable.
- If the two-wheeler is equipped with a cable splitter, you can replace several or all of the cables.
| Throttle Cable 850mm / 110mm Pit Bike / Dirt Bike blue | |
|---|---|
| Article no. | MB3645 |
| EAN | 3700949602743 |
| Weight | 0,12 kg |
| Brand | Standard Parts |
| Product type | Throttle cable |