V-Belt Hutchinson 690x15x10mm Peugeot 103 SPX / RCX
This product is no longer available
Unfortunately, we no longer sell this product in our shop.
However, we would like to help you find an alternative. Please take a look at other products within the same category or contact us so we can help you find the right product.
Description
Since worn drive belts negatively affect performance, they have to be replaced on a regular basis. This is a serrated, or cogged, drive belt for Peugeot 103 SPX / RCX mopeds. It replaces the original belt, simply swap, and your transmission is as good as new.
- measurements: 690 x 15 x 10mm
- type: cogged / toothed
When to change the V-belt?
On scooters, the engine power is transmitted to the rear wheel via the V-belt or drive belt, which connects the CVT variator to the torque drive. As a rule, it should be replaced every 10,000 to 20,000 km. The belt slips when it is heavily worn. By the way, a new belt also slips and needs a short run-in period.
How to change the drive belt?
Replacing the V-belt is a relatively easy, you don't need advanced technical know-how. The first step is to remove the variator cover to get to the variator. You'll need a piston stopper and a blocking tool to remove the CVT and clutch bell. You can then remove the worn V-belt and replace it with the new one. When reassembling, make sure that the V-belt is properly seated and has the correct tension.
Here's a little tutorial on How to change the CVT and drive belt (English Subs).
| V-Belt Hutchinson 690x15x10mm Peugeot 103 SPX / RCX | |
|---|---|
| Article no. | CGN497144 |
| EAN | 3248382003203 |
| Weight | 0,20 kg |
| Brand | Hutchinson |
| Product type | V-belt |
