Skip to content
Scooter
50cc Bike
Moped
Motocross
Rear Shock Absorber Stage6 R/T Replica 310mm Piaggio
Rear Shock Absorber Stage6 R/T Replica 310mm Piaggio
Rear Shock Absorber Stage6 R/T Replica 310mm Piaggio
Rear Shock Absorber Stage6 R/T Replica 310mm Piaggio
Rear Shock Absorber Stage6 R/T Replica 310mm Piaggio
Rear Shock Absorber Stage6 R/T Replica 310mm Piaggio
Rear Shock Absorber Stage6 R/T Replica 310mm Piaggio
Rear Shock Absorber Stage6 R/T Replica 310mm PiaggioRear Shock Absorber Stage6 R/T Replica 310mm PiaggioRear Shock Absorber Stage6 R/T Replica 310mm PiaggioRear Shock Absorber Stage6 R/T Replica 310mm PiaggioRear Shock Absorber Stage6 R/T Replica 310mm PiaggioRear Shock Absorber Stage6 R/T Replica 310mm PiaggioRear Shock Absorber Stage6 R/T Replica 310mm Piaggio
Stage6 R/T
Article no.: S6-14614005

Rear Shock Absorber Stage6 R/T Replica 310mm Piaggio

RRP
321,00 €
-10% Discount
289,00 €

incl. tax, plus shipping

Availability:
In stock
Dispatch:
Now
Attention!

You did not select a vehicle.
You still want to buy this item?

Attention!

Note: The product does not match the selected vehicle model. Continue anyway? 

You'll get 289 reward points
Share product

Description

Stage6 R/T Rear Shock Absorber Replica Piaggio Zip 1 & 2 / Gilera Runner - little brother of Stage6's HQ gas-charged R/T shock absorbers.

Spring pre-load and rebound damping can be adjusted with wheel nuts at both ends. As a "replica" shock, this is mainly developed for sportive road riding with premium quality suspension.

As you can see, a lot of attention was spent on design and finish, with anodized orange applications for an authentic racing look.

Note: the length, that is, the distance between the center of the mounting hole at the top top and center of the hole at the bottom, of the shock absorber is 310 mm and is used on many Piaggio / Gilera / Aprilia / Vespa scooters. To be sure that the shock really fits on your scooter, we recommend to measure the length of the original shock.

Details:

  • Spring rate: 115LB
  • Length: 310mm
Questions about the product
 
 
Notes and Safety

Shock absorber

Basic functionality

Whether motocross, scooter, moped or motorcycle, shock absorbers have a very simple and basic function: they absorb shocks and vibrations to make riding comfortable and safe. Without shock absorbers, you wouldn't be able to reach very high speeds because the wheels wouldn't really stay on the ground.

Since shock absorbers provide the connection to the ground and are therefore one of the main safety elements of a vehicle, they need to be maintained regularly and be fully operational at all times.

What are the symptoms of a defective shock absorber?

A shock absorber is supposed to absorb shocks, but not simply act like a spring, otherwise it would act like a catapult.

If the shock absorber comes up too fast after compression, jams, squeaks or smears oil (oil leak), it must be repaired or replaced.

For motocross machines with high-end shock absorbers that are very expensive, there are repair kits for shock absorbers. However, you will need some technical know-how and special tools to do these repairs.
For scooters and 50cc motor cycles, it's often easier to buy inexpensive new shock absor bers to do a complete replacement like a car.

Simple, adjustable, Racing

Gas pressure or hydraulic, simple shock or complex system - there are many different types of shock absorbers.
On the one hand, spring travel is important, which allows for more or less intensive use, and there are also different options for adjusting the shock depending on the model.
There are simple models like most original shock absorbers on scooters. Shock absorbers can also have different adjustment options that allow the handling to be adapted to the rider, use and conditions. These include shocks with adjustable spring preload, high-low shocks with adjustable compression for low and high speeds, and shocks with adjustable rebound like the ones on motocross bikes.
Racing shock absorbers are the most technically advanced models, they have all the above adjustment options, are made of particularly high-quality materials and often have a special finish (eg, the popular "Kashima coating").

How to replace the shock absorber

Technical details
Rear Shock Absorber Stage6 R/T Replica 310mm Piaggio
Article no.S6-14614005
EAN4051272265303
Weight1,82 kg
SeriesR/T
BrandStage6 R/T
Product typeShock absorber
PositionRear
Length310 mm
ColourOrange
Colour versionorange
Compatible vehicles for this article
Customer reviews
5
2 Ratings
2
 
0
 
0
 
0
 
0
 
Le
LeGuetteurDu38
stage 6
Jolie, trés performant
Write a review
Shopping cart

JavaScript ist in Ihrem Browser deaktiviert.
Bitte aktivieren Sie JavaScript um unseren Webshop nutzen zu können und laden diese Seite erneut.

Back to top
Categories
Products