Skip to content
50cc Bike
Article no.: M619733

CVT Rear Pulley Malossi MHR Overrange Yamaha Aerox / MBK Nitro

218,00 €

incl. tax, plus shipping

In stock

You did not select a vehicle.
You still want to buy this item?


Note: The product does not match the selected vehicle model. Continue anyway? 

You'll get 218 reward points
Share product


HQ torque driver by Malossi.

A larger diameter expands the rpm range of your engine And, together with a matching variator, performance throughout the entire rpm range will be improved.

The slots were modified for more linear and quicker pulley opening.

Questions about the product
Notes and Safety

Malossi MHR

The MHR series from Malossi is generally available in 3 categories for the most popular models:

The 3 model series differ in terms of performance and competitiveness. The MHR Team series includes the top-of-the-line  models with outstanding performance for racing. The MHR Racing is in the middle, and the MHR Replica adopts the basic features of the higher versions, with the emphasis on reliability for everyday use rather than maximum performance for the race track.

Malossi Overrange

The Overrange CVT series comprises a limited number of products. It is a complete Overrange CVT with all associated components.

Overrange CVTs are larger than standard CVTs and thus have a larger adjustment range. Overrange CVTs are primarily suitable for heavily tuned engines. The Malossi Overrange variator will get the full power out of your engine.

The kits usually include:

  • A complete CVT front pulley
  • A complete torque drive / rear pulley
  • Different CVT weights
  • A contra spring
  • Grease / lubricant

rear pulley

The torque drive,  also called secondary or driven pulley, is an integral part of the automatic transmission on scooters. It is the counterpart to the variator or front pulley and forms the rear drive unit. The rear pulley is located at the rear of the CVT housing and forms a unit with the clutch. As with the front pulley, there are also tuning versions of the rear pulley.

Working of a CVT transmission

The front and rear pulley (variator and torque driver) work together and are interdependent. At idle, the V-belt rides on its highest position on the rear pulley and on its lowest position on the front pulley. When you accelerate and engine speed increases, the drive pulley in front turns faster and faster. The centrifugal force pushes the variator weights outwards, opening the front pulley. This opening forces the V-belt to move further and further away from the axle shaft. As the belt cannot be stretched and is under tension, it has to move inwards on the opposite side of the CVT.

This increases the speed of the wheel and the scooter becomes faster. As soon as the V-belt has reached its maximum position on the front pulley and its lowest position in the rear pulley, the maximum drive ratio is reached. Now the scooter can reach maximum speed until the maximum gear ratio is reached.

When braking, the variator in front opens and the torque drive at the rear closes. The contra spring assists the closing movement of the driven pulley so that the V-belt returns to its original position.

Tuning torque driver

The performance of the torque drive depends heavily on the torque spring. In addition to the pitch and surface finishing, which can affect the speed of the belt movement, the hardness of the contra spring must be adapted to the engine power. In general, the more powerful the engine, the harder the spring.

Oversize torque drives are also available, usually as part of a complete drive kit with oversize front pulley and matching V-belt, which increase the working range of the drive ratio.

The highest quality torque converters offer various improvements - anti-wear treatment, reinforced bearings, special coating for more grip, guide bushes with different angles, improved heat dissipation ...., i.e. even more fine-tuning and options. The finer the adjustment and the better it is matched to the setup, the higher the performance.

Technical details
CVT Rear Pulley Malossi MHR Overrange Yamaha Aerox / MBK Nitro
Article no.M619733
Weight0,85 kg
SeriesMHR, Overrange
Product typeTorque drive
Compatible vehicles for this article
Customer reviews
8 Ratings
Dim R.
Riding style:
Product quality:
Value for money:
Expectations met:
Mauvais équilibrage
Il n’est pas équilibré et fait vibrer le scooter a partir de 90 km/h.
Je vais le passer au tour pour le rééquilibrer.
Un amis a moi en a un et j’ai constaté le meme problème.
On s’en rend compte en le lançant au doigt qu’il ne tourne pas rond.
Se correcteurs mhr et top avec le vario mhr
tres bon produit
ce correcteur est le meilleur avec le stage 6
Write a review
Shopping cart

JavaScript ist in Ihrem Browser deaktiviert.
Bitte aktivieren Sie JavaScript um unseren Webshop nutzen zu können und laden diese Seite erneut.

Back to top