Description
Spacer Stage6 R/T 5mm Piaggio
Stage6 Cylinder Spacer 5mm w/ stud bolts f. 85mm conrod M6x114mm Piaggio LC (NRG / Runner), for running crankshafts with 85mm connecting rod.
If you want to install a crankshaft with a 85mm connecting rod instead of a regular 80mm crankshaft, you'll have to raise the cylinder to achieve proper deck height for piston travel. This spacer kit was designed for the 85mm Stage6 R/T crankshaft. With some minor adjusting you can now run most tuning cylinders with long-stroke crankshafts with 85mm connecting rod.
Details cylinder spacer 5mm
- 5mm aluminium spacer
- 4x stud bolts M6x114mm
Cylinder spacer
Cylinder spacers should only be used by experienced tuners who have enough know-how to understand the complex workings of an engine and implement the corresponding measures.
What is the benefit of a cylinder spacer?
A cylinder spacer may be necessary if you are using a long-stroke crankshaft, as the piston rises higher in the cylinder to increase displacement.
With a 2-stroke engine, however, you cannot simply raise the cylinder. Raising the cylinder will also increase port timingd, which will completely change engine behavior; it can also result in a significant loss of power at low engine speeds.
If you want to use a spacer, make sure that the crankshaft, connecting rod and cylinder are designed for it or are compatible.
Note: Cylinder spacers vary from engine to engine. Their thickness must be matched to the crankshaft and cylinder. Please also remember to order cylinder studs in the correct length.
| Cylinder Spacer Stage6 R/T 5mm w/ stud bolts M6x114mm 85mm conrod Piaggio LC | |
|---|---|
| Article no. | S6-79140ET01 |
| EAN | 4051272155741 |
| Weight | 0,17 kg |
| Series | R/T |
| Brand | Stage6 |
| Product type | Cylinder spacer |
| Stroke | Original |
| Conrod length | Standard |